GWINSTEK - GPM-8330-60 GPIB/DA12 GW Instek GPM-8330-60 GPIB/DA12 is a Digital Power Meter (RS-232C / USB device & host / LAN and opt. GPIB+DA12) GW Instek GPM-8320-60/GPM-8330-60 are extension models of the existing three-phase power meter GPM-8320/GPM-8330. The GPM-8320-60 provides 2 input elements, and the GPM-8330-60 provides 3 input elements and the added "-60" symbol means the maximum current of the direct input can reach 70 A (60 A is guaranteed specification) , which not only enhance the high-current power measurement applications, but also save the cost of current transformer compared to the existing models.These models have a testing bandwidth of DC, 0.1 Hz to 100 kHz and feature 16-bit A/D converters and a sampling rate of 300 kHz. A 5-inch TFT LCD display, 5 digits of measurement readings, 25 different power measurement parameters, and high precision measurement capabilities are also provided.GPM-8320-60/GPM-8330-60 also feature waveform display capabilities (voltage/current/power), the integration measurement function, harmonics measurement and analysis of multiple orders (50 Hz / 60 Hz measurement complies with IEC61000-4-7 requirements), external sensor input terminals, and a variety of communications interfaces. These features help users achieve clear, convenient, and accurate power measurements, making them the most fully-featured and cost-effective power meters in the same category.Features- 5” TFT LCD- Voltage/Current Test Freq. Bandwidth: DC, 0.1 Hz to 100 kHz- Direct input current up to 60 A- Waveform Display : V (Voltage), I (Current), P (Wattage)- Distorted wave Current/Voltage measurement: full range for CF=3, and half range for CF=6 (or 6A)- Meeting IEC 61000-4-7 harmonic measurement (50 Hz / 60 Hz)- Wiring selecting button (1P3W,3P3W,3P4W,3V3A)- Harmonic measurement & analysis up to 50 orders- Auto ranging function for Integration mode- Screen Capture through USB host- Provide external current sensor input (EXT1/EXT2)

GW INSTEK - GPT-12004 - AC/DC/IR/GB Electrical Safety AnalyzerGW Instek introduces the flagship model (200VA output capacity) safety analyzer-the GPT-12000 series, which is the first safety analyzer in the world to comply with IEC 61010-2-034 (safety requirement for electrical requirement for measurement, control and laboratory use – particular requirements for measurement equipment for insulation resistance and test equipment for electric strength), which stipulates that the requirements of the software and hardware interfaces must be followed while designing high voltage and insulation resistance test and measurement instruments so as to ensure that users are provided with necessary protection and warning while using the instruments.Key features:- 200VA AC Test Capacity- Comply with IEC 61010-2-034- 7”TFT LCD- Manual / Auto Mode- RMS Current Measurement- Zero Crossing Turn-on Operation- Controllable Ramp-up & Ramp-down Time- Capacitive Load Testing Capability up to 47μF- Statistics & Analysis Function- Sweep Function for DUT Characteristic Analysis- Convenience Listed AUTO mode easy to read result & judge- Internal Storage & USB Storage available- Barcode Function available- Setting Data Export / Import Rear panel output available- Interface : RS-232C, USB host/device, Signal I/O and option GPIB or LAN- Universal power input

GW INSTEK - GPT-9603 - AC/DC Withstanding Voltage/Insulation Resistance Tester The GPT-9600 Series offers an affordable solution for supporting routine tests of major items of the safety standards such as IEC, EN, UL, CSA, GB, JIS and other safety regulations. The GPT-9600 Series is built upon a platform of 100VA AC maximum power output while this model, GPT-9603, is a 3-in-1 capable of performing AC withstanding, DC withstanding and insulation resistance tests. This series is equipped with the high-efficiency PWM amplifier, which is the core of the platform design to impede the influence from the input AC voltage fluctuation and ensure a stable voltage output. Additionally, it renders users an intuitive operation environment by a simple and clear panel layout, a large LCD display and color LED indicators. The switching power supply, used as a universal input source, accommodates the power systems in most countries in the world.Key features:- 100VA AC Test Capacity- 240 x 48 Ice Blue Dot Matrix LCD- RMS Current Measurement- ARC Detection- Zero Crossing Turn-on Operation- PWM Switching Amplifier to Enhance the Power Efficiency and Reliable Testing- Automatically Switching Input Source for World-wide Input Voltage- Light Design and Easy to Operation

GWINSTEK - GPT-9803  A.C. 200VA AC/DC Withstanding Voltage/Insulation Resistance TesterA Solid Foundation for Reliable, Safe and Practical Safety Compliance Testing GW Instek is launching to the market a series of safety tester (hi-pot tester/hipot tester) with high durability and multiple user-protection design. The GPT-9800 supports the major test items among all the needed for the compliance of the safety standards such as IEC, EN, UL, CSA, GB, JIS and other safety regulations. A total of 4 safety testers in the GPT-9800 Series, namely GPT-9804, GPT-9803, GPT-9802 and GPT-9801, are available for various applications. The GPT-9804 is a 4-in-1 model capable of performing AC withstanding, DC withstanding, insulation resistance and ground bond tests. The GPT-9803 is a 3-in-1 model capable of performing AC withstanding, DC withstanding as well as insulation resistance tests. The GPT-9802 is capable of performing both AC and DC withstanding tests, whereas the GPT-9801 is able to perform AC withstanding test. The series of safety tester is built upon a high-efficiency PWM amplifier platform with AC 200VA maximum output capacity to impede the influence from the voltage fluctuation of the input AC source. This ensures a stable voltage supply for all the tests of the GPT-9800 Series.Targeting user’s protections, the GPT-9800 series uses a combination of hardware and software controls to improve safety: A self-check is performed to make sure all the functions and operations are under normal condition each time when the tester is turned on; the Zero Crossing Turn-On design imposes the output voltage to always begin at the zero crossing of a sine wave to avoid the impact of surge voltage output; and the output voltage is automatically cut off (within 150μs) when abnormal output voltages have been detected or when the upper or lower current limits have been reached during testing. To protect operator from hazardous injury, the GPT-9800 Series automatically discharges the DUT after test (within 200ms) each time to eliminate excessive voltage that remains on the DUT. To further ensure safety, the interlock connector can also be used as double protections to prevent inadvertent operation.The GPT-9800 Series, equipped with a simple & clear panel layout, a high resolution dot matrix LCD display, and color LED indicators, allows operators to interpret measurement results easily and quickly. All major test functions, including AC withstanding (AC 5kV/40mA), DC withstanding (DC 6kV/10mA), insulation resistance (DC 50V ~ 1000V) and ground bond (AC 30A max.) tests, are performed under a high-stability voltage output with high-resolution measurement results. Further more, the test duration, ramp up time and upper/lower limits of the output voltage are fully-adjustable to accommodate a wide variety of safety tests with accurate measurement results.Features- 200VA AC Test Capacity- 240x64 Ice Blue Dot matrix LCD- Manual/Auto Mode- Function Key for quick selecting- High intensity flash for Caution & Status indication- Safety INTERLOCK function- Zero Crossing Turn-on Operation- Controllable Ramp-up Time- RMS Current Measurement- High resolution: 1uA for measuring current, 2V for setting voltage- PWM amplifier to enhance the power efficiency and reliable testing- Max. 100 memory block for test condition (step) setting. And each step can be named individually.- Remote terminal on the front panel for “start” and “stop” control- Interface : RS-232C, USB device, Signal I/O and GPIB (optional)

GW Instek - GPT-9903A  A.C. 500VA AC/DC Withstanding Voltage/Insulation Resistance Tester A Solid Foundation for Reliable, Safe and Practical Safety Compliance TestingGWInstek is launching a new safety tester (hi-pot tester/hipot tester) family, the GPT-9900 series, with 500VA maximum output capacity to the market. The family of four, including GPT-9904, GPT-9903A, GPT-9902A and GPT-9901A, come joining the GPT-9800 series, which carries 200VA output capacity, to serve the market with higher power demands for the safety tests of electronic products and components. The GPT-9000 series supports the major test items among all the needed for the compliance of the safety standards such as IEC, EN, UL, CSA, GB, JIS and other safety regulations.The GPT-9900 series is built upon a platform of AC 500VA maximum power output. The GPT-9904 is a 4-in-1 model capable of performing AC withstanding, DC withstanding, insulation resistance and ground bond tests, whereas the GPT-9903A is a 3-in-1 model capable of performing AC withstanding, DC withstanding and insulation resistance tests. The GPT-9902A is capable of performing both AC and DC withstanding tests whereas The GPT-9901A is able to only perform AC withstanding tests.The GPT-9900 series safety tester follows every good feature and advantage of the GPT-9800 series. The high-efficiency PWM amplifier is the core of GPT-9900 platform design to impede the influence from the voltage fluctuation of input AC source. The output voltage is automatically cut off (within 150μs) upon the detection of an abnormal output voltage or a trip of current limits during test to protect the operator from hazardous injury. The GPT-9900 series automatically discharges the DUT after each test to eliminate excessive voltage that remains on the DUT.Following a tidy and easy-to-use design concept, the GPT-9900 series is equipped with a simple & clear panel layout, a high resolution dot matrix LCD display, and color LED indicators, allowing operators to interpret measurement results easily and quickly. In the role as the complement of 200VA safety testers, the GPT-9900 series is designed upon a 500VA output platform to enhance all major test functions, including AC withstanding (AC 5kV/100mA), DC withstanding (DC 6kV/20mA), insulation resistance (DC 50V ~ 1000V/50GΩ max.) and ground bond (AC 32A max./650mΩ max.) tests, with high-power measurement capabilities. Further more, the test duration, ramp up time and upper/lower limits of the output voltage are fully-adjustable to accommodate a wide variety of safety tests with accurate measurement results. The “Sweep” function of the GPT-9900 series is able to display the test results point by point all through the testing period to form a trace graph. This graphic display performs the characteristic verification of a DUT through observing the parameter response to the changes of the applied voltage or current or testing time. On the graph a movable marker is available to get the parameter reading on the specific point of user’s interest.Other significant functions and features of the GPT-9900 series include the rear panel output for system applications, the open-circuit detection to ensure proper connections of apparatus for ground bond test, 100 sets of memory to save and recall the panel settings for individual or sequential tests, a remote output on-off terminal in the front panel and a signal I/O port in the rear panel provided as the means for remote start/stop control of the safety tester, and RS-232C, USB and GPIB (optional) interfaces available for PC remote control and test result logging.Features- 500VA AC Test Capacity- Short Current > 200mA- 240x64 Ice Blue Dot matrix LCD- Sweep Function for DUT characteristic analysis- Insulation resistance measurement up to 50GΩ(GPT-9903A/9904)- Manual/Auto Mode- Function Key for quick selection- High intensity flash for caution & Status indication- Safety INTERLOCK function- Zero Crossing Turn-on Operation- Controllable Ramp-up Time- RMS Current Measurement- High resolution: 1uA for measuring current, 2V for setting voltage- PWM amplifier to enhance the power efficiency and reliable testing- Max. 100 memory block for test condition (step) setting. And each step can be named individually.- Remote terminal on the front panel for “start” and “stop” control- Rear panel output available- Interface : RS-232C, USB device, Signal I/O and GPIB (optional)

GW Instek - GPT-9904  A.C. 500VA AC/DC Withstanding Voltage/Insulation Resistance/Ground Bond Tester A Solid Foundation for Reliable, Safe and Practical Safety Compliance Testing GWInstek is launching a new safety tester (hi-pot tester/hipot tester) family, the GPT-9900 series, with 500VA maximum output capacity to the market. The family of four, including GPT-9904, GPT-9903A, GPT-9902A and GPT-9901A, come joining the GPT-9800 series, which carries 200VA output capacity, to serve the market with higher power demands for the safety tests of electronic products and components. The GPT-9000 series supports the major test items among all the needed for the compliance of the safety standards such as IEC, EN, UL, CSA, GB, JIS and other safety regulations. The GPT-9900 series is built upon a platform of AC 500VA maximum power output. The GPT-9904 is a 4-in-1 model capable of performing AC withstanding, DC withstanding, insulation resistance and ground bond tests, whereas the GPT-9903A is a 3-in-1 model capable of performing AC withstanding, DC withstanding and insulation resistance tests. The GPT-9902A is capable of performing both AC and DC withstanding tests whereas The GPT-9901A is able to only perform AC withstanding tests.The GPT-9900 series safety tester follows every good feature and advantage of the GPT-9800 series. The high-efficiency PWM amplifier is the core of GPT-9900 platform design to impede the influence from the voltage fluctuation of input AC source. The output voltage is automatically cut off (within 150μs) upon the detection of an abnormal output voltage or a trip of current limits during test to protect the operator from hazardous injury. The GPT-9900 series automatically discharges the DUT after each test to eliminate excessive voltage that remains on the DUT. Following a tidy and easy-to-use design concept, the GPT-9900 series is equipped with a simple & clear panel layout, a high resolution dot matrix LCD display, and color LED indicators, allowing operators to interpret measurement results easily and quickly. In the role as the complement of 200VA safety testers, the GPT-9900 series is designed upon a 500VA output platform to enhance all major test functions, including AC withstanding (AC 5kV/100mA), DC withstanding (DC 6kV/20mA), insulation resistance (DC 50V ~ 1000V/50GΩ max.) and ground bond (AC 32A max./650mΩ max.) tests, with high-power measurement capabilities. Further more, the test duration, ramp up time and upper/lower limits of the output voltage are fully-adjustable to accommodate a wide variety of safety tests with accurate measurement results. The “Sweep” function of the GPT-9900 series is able to display the test results point by point all through the testing period to form a trace graph. This graphic display performs the characteristic verification of a DUT through observing the parameter response to the changes of the applied voltage or current or testing time. On the graph a movable marker is available to get the parameter reading on the specific point of user’s interest. Other significant functions and features of the GPT-9900 series include the rear panel output for system applications, the open-circuit detection to ensure proper connections of apparatus for ground bond test, 100 sets of memory to save and recall the panel settings for individual or sequential tests, a remote output on-off terminal in the front panel and a signal I/O port in the rear panel provided as the means for remote start/stop control of the safety tester, and RS-232C, USB and GPIB (optional) interfaces available for PC remote control and test result logging.  Features - 500VA AC Test Capacity - Short Current > 200mA - 240x64 Ice Blue Dot matrix LCD - Sweep Function for DUT characteristic analysis - Insulation resistance measurement up to 50GΩ(GPT-9903A/9904) - Manual/Auto Mode - Function Key for quick selection - High intensity flash for caution & Status indication - Safety INTERLOCK function - Zero Crossing Turn-on Operation - Controllable Ramp-up Time - RMS Current Measurement - High resolution: 1uA for measuring current, 2V for setting voltage - PWM amplifier to enhance the power efficiency and reliable testing - Max. 100 memory block for test condition (step) setting. And each step can be named individually. - Remote terminal on the front panel for “start” and “stop” control - Rear panel output available - Interface : RS-232C, USB device, Signal I/O and GPIB (optional)

GWINSTEK - GVM-9102 GW Instek GVM-9102 is a 6 1/2 Digit- 2 kV DC VoltmeterGW Instek launches GVM-9102 6 ½ digit 2 kV Voltmeter, featuring high precision DC voltage accuracy, fast sampling rate, 6 mathematical functions (dB/dBm/Compare/ MX+B/Percent and 1/X) as well as a variety of communications interfaces (USB device/host, RS-232C, LAN, digital I/O and optional GPIB) to provide comprehensive measurement capabilities, higher speed and accuracy, making it particularly suitable for output measurement of energy storage devices, photovoltaic devices or DC power supply devices. The GVM-9102 provides DC voltage measurement up to 2400 V without the need for attenuators, effectively reducing measurement losses and errors. In addition, the GVM-9012 also features math functions (dB, dBm, comparison, MX+B, 1/X and percentage), statistical functions (min/max/avg/P-P/STDEV) and various standard communication interfaces. Whether operated as a desktop or installed in a system, the GVM-9102 can meet specific measurement requirements and complex measurement applications. Features- 6 1/2 Digit Display: 2,399,999 Counts max.- 4.3 TFT Graphic LCD- DC voltage measurement up to 2400 V- DCV Basic Accuracy:0.01%- The fastest sampling rate:10k Readings/sec- USB Storage function available- Graphic display capability, providing histogram, bar meter and trend chart- Standard interfaces : Digital I/O, RS-232C, USB Host/Device, LAN- Option interface : GPIB

ITECH - IT5101E - USED DEMO UNITIT5101E Battery TesterIT5100 series is a series of battery internal resistance testers with high precision, high resolution and high speed. IT5100 adopts AC 4-terminal sensing, that means the tester can test internal resistance and voltage simultaneously with high precision. Resistance resolution is down to 0.1 μΩ, voltage resolution is 10 μV.  Combined with external USB disk, IT5100 is available for long-term statistics calculation.Built-in comparator function, IT5100 can automatically determine whether the battery parameters meet the standards and count pass rate, which is suitable for a variety of battery`s test and pick. Built-in USB / LAN communication interface to support SCPI communication protocol.Single unit of IT5102 support 16 channels batteries measurement, master- slave connection up to max.17 sets and extension channels quantity up to 272, that greatly improves testing efficiency. Built-in LAN / RS232 communication interface, IT5100 series can be widely applied in cellphone lithium batteries,electric vehicle batteries and other batteries inspection and sorting.Features:Support resistance & voltage simultaneously test and display, 4.3 inch LCD screenVoltage ranges: ±300 VResistance ranges: 15 mΩ ~ 3000 mΩvoltage ranges,7 resistance ranges, optional automatic or mannu measuringSupport resistance & voltage simultaneously test, speed up to 125 times/S under Ex_Fast modeBuilt-in USB, LAN interfaces,supports SCPI protocol.Statistics calculation and data USB storage functionComparator function: sorting result HI/IN/LOW displayZero adjustment function4-terminal AC measurementMeasuring result alarmAvailable for supporting ITS5300 battery charging & discharging test system automatic measurement. 

RIGOL - KELVINTESTCLIP-DMM - Lab Cable Set with 2 Kelvin Test Cables (Kelvin to 2 Banana)  Lab Cable Set with 2 Kelvin Test Cables (Kelvin to 2 Banana)

GW INSTEK - LCR-1100 - Handheld LCR Meter 100kHz GW Instek launches the new LCR-1000 series, which is a handheld LCR meter with the automatic real-time test function. The series adopts TFT-LCD and provides a basic accuracy of 0.2%. Users can choose to use buttons or touch screen operations. The series, with high measurement accuracy and usability, is suitable for precision tests, including maintenance test, component production, schools/research institutes, and even quality test.The LCR-1000 series comprises 2 models. The LCR-1100 provides a test frequency up to 100 kHz, and the LCR-1010 provides a test frequency up to 10 kHz. The series provides selectable test voltages (0.3/0.7/1.0Vrms) and equivalent circuits (series/parallel) to automatically measure capacitance, inductance, resistance, reactance, impedance, quality factor, loss factor, phase and DC resistance.The LCR-1000 series, with 50,000 display counts for both main and auxiliary parameters and a basic accuracy of 0.2%, supports 2-wire or 5-wire measurement. Furthermore, the series also provides the comparison function and data retention function to meet various test and measurement requirements for different types of components. The entire series is equipped with USB-HID and USB-VCOM interfaces. A simple and practical free PC software is provided and remote control commands (compatible with SCPI) are available for users to write their own personal software to meet the needs of data acquisition.Features:- 2.8” TFT Touch LCD- 50,000 Counts Resolution on Primary and Secondary Display- 0.2% Basic Accuracy- Six or Eight Selectable Test Frequencies Depends on Model- 15 Kinds Measurement Combinations Available- Test Level Selectable : AC 0.3V/0.7V/1Vrms and DC +/- 1V- Selectable measurement Speed : Fast 10 Times/s, Slow 2.5 Times/s- Auto LCR Mode for Automatic Component Type Identification and measurement- Data Hold- USB (Virtual COM) Interface for Remote Communication- Software for Datalogging is Available

GW Instek - LCR-6002 2kHz Precision LCR MeterGW Instek introduces the brand new high-precision LCR meter - the LCR-6000 series, offering five models with a test frequency range of 2 kHz / 20 kHz / 100 kHz / 200 kHz / 300 kHz (maximum) and a basic accuracy of 0.05%. The compact design, 2U height and ½ rack, is one of the practical features of the series, which is ideal as a space-saving device for the table or system rack. The compact LCR-6000 series with its numerous features is an excellent tool for R&D, production testing, IQC, etc. in conducting all levels of passive component testing.Key Features- 3.5" color LCD- 10 Hz ~ 2 kHz (±0.01%) (4 digit resolution)- Consecutive test frequency- Basic accuracy: 0.05%.- Measuring speed up to 25 ms (max.)- Full frequency range or spot OPEN/SHORT- 16 main/secondary parameter measurement combinations and two additional monitoring parameters (a maximum of four different parameters can be displayed at the same time)- DCR measurement and internal DC bias voltage (±2.5 V)- PASS/FAIL assessment- Auto Level Control (ALC) function- BIN function provides 9BIN and 1AUX, total- 10 BIN 10 levels of listed tests to select various frequency, voltage and current criteria- Standard interface: RS-232C, Handler and USB Host/Device- Compact size ideal for automatic devices (2U ½ rack)

GW Instek - LCR-6100 GW Instek LCR-6100 is a 100kHz Precision LCR Meter The LCR-6000 series, a compact LCR meter with diversified and abundant features, is an excellent tool for various application stages of passive components, including R&D, engineering testing, incoming inspection, etc., or the production and sorting of passive components. High-precision LCR-6000 meter provides test frequency from 2kHz/20kHz/100kHz/200kHz/300kHz (the highest), the basic accuracy is up to 0.05%, and there are 5 models in total.​ The LCR-6000 series adopts 3.5-inch color LCD and features opulent display parameters. In addition to simultaneously displaying setting criteria and measurement results, the series increases two additional monitoring parameters. In other words, there are four parameters, primary/secondary and two monitoring, simultaneously shown on the screen that tremendously enhances the measurement efficiency. The enlarge display mode not only emphasizes the measurement results, but also provides PASS/FAIL judgment to facilitate a rapid and convenient test result.Convenience is one of the unique features. The LCR-6000 series comes equipped with two zero methods, which are full frequency range and spot. Users, without turning off the power and changing test fixture, can freely change frequency within the provided frequency range to conduct measurements. By so doing, tremendous time can be saved from repeatedly executing zero operation. Additionally, frequency range of the series is consecutive that allows users to input precise frequency value to conduct the most genuine test on components.The brand new compacted LCR-6000 series can effectively improve the limitation of space. Diverse measurement functionalities and display methods are making the series the high CP ratio choice in meeting the requirements of R&D, component assessment for engineering departments, category sorting requirements for component production, and IQC for verification on component specifications. Features- 3.5” color LCD- 5 models (10Hz~2kHz/20kHz/100kHz/200kHz/300kHz)- Consecutive test frequency- Basic accuracy : 0.05%- Measuring speed up to 25ms (max.)- Full frequency range or spot OPEN/SHORT- 16 major/secondary parameter measurement combinations and two additional monitoring parameters(maximum four different parameters can be shown simultaneously)- DCR measurement and internal D.C. bias voltage (±2.5V)- PASS/FAIL judgment Auto Level Control (ALC) function- BIN function provides 9 BIN and 1 AUX, totally 10 BIN- 10 steps listed tests to select different frequency, voltage and current criteria- Standard interface : RS-232C, Handler and USB Host / Device- Compact size, ideal for automatic equipment (2U,1/2 RACK)

GW Instek - LCR-6200 - LCR-6200 is a LCR Meter up to 200kHzThe LCR-6000 series, a compact LCR meter with diversified and abundant features, is an excellent tool for various application stages of passive components, including R&D, engineering testing, incoming inspection, etc., or the production and sorting of passive components.High-precision LCR-6000 meter provides test frequency from 2kHz/20kHz/100kHz/200kHz/300kHz (the highest), the basic accuracy is up to 0.05%, and there are 5 models in total.​ Features- 3.5” color LCD- 5 models (10Hz~2kHz/20kHz/100kHz/200kHz/300kHz)- Consecutive test frequency- Basic accuracy : 0.05%- Measuring speed up to 25ms (max.)- Full frequency range or spot OPEN/SHORT- 16 major/secondary parameter measurement combinations and two additional monitoring parameters(maximum four different parameters can be shown simultaneously)- DCR measurement and internal D.C. bias voltage (±2.5V)- PASS/FAIL judgment- Auto Level Control (ALC) function- BIN function provides 9BIN and 1AUX, totally 10 BIN- 10 steps listed tests to select different frequency, voltage and current criteria- Standard interface : RS-232C, Handler and USB Host / Device- Compact size, ideal for automatic equipment (2U,1/2 RACK)

GW Instek - LCR-6300 GW Instek LCR-6300 is a 300kHz Precision LCR Meter  The LCR-6000 series, a compact LCR meter with diversified and abundant features, is an excellent tool for various application stages of passive components, including R&D, engineering testing, incoming inspection, etc., or the production and sorting of passive components.  High-precision LCR-6000 meter provides test frequency from 2kHz/20kHz/100kHz/200kHz/300kHz (the highest), the basic accuracy is up to 0.05%, and there are 5 models in total.​The LCR-6000 series adopts 3.5-inch color LCD and features opulent display parameters. In addition to simultaneously displaying setting criteria and measurement results, the series increases two additional monitoring parameters. In other words, there are four parameters, primary/secondary and two monitoring, simultaneously shown on the screen that tremendously enhances the measurement efficiency. The enlarge display mode not only emphasizes the measurement results, but also provides PASS/FAIL judgment to facilitate a rapid and convenient test result.Convenience is one of the unique features. The LCR-6000 series comes equipped with two zero methods, which are full frequency range and spot. Users, without turning off the power and changing test fixture, can freely change frequency within the provided frequency range to conduct measurements. By so doing, tremendous time can be saved from repeatedly executing zero operation. Additionally, frequency range of the series is consecutive that allows users to input precise frequency value to conduct the most genuine test on components. The brand new compacted LCR-6000 series can effectively improve the limitation of space. Diverse measurement functionalities and display methods are making the series the high CP ratio choice in meeting the requirements of R&D, component assessment for engineering departments, category sorting requirements for component production, and IQC for verification on component specifications.  Features - 3.5” color LCD - 5 models (10Hz~2kHz/20kHz/100kHz/200kHz/300kHz) - Consecutive test frequency - Basic accuracy : 0.05% - Measuring speed up to 25ms (max.) - Full frequency range or spot OPEN/SHORT - 16 major/secondary parameter measurement combinations and two additional monitoring parameters(maximum four different parameters can be shown simultaneously) - DCR measurement and internal D.C. bias voltage (±2.5V) - PASS/FAIL judgment Auto Level Control (ALC) function - BIN function provides 9 BIN and 1 AUX, totally 10 BIN - 10 steps listed tests to select different frequency, voltage and current criteria - Standard interface : RS-232C, Handler and USB Host / Device - Compact size, ideal for automatic equipment (2U,1/2 RACK)

RIGOL - M300 - DAQ System Mainframe. 5 slots for modules DMM, Multiplexers, Actuator, Matrix Switch.Multifunction DAQ System for multichannel measurement and switch applications. 5 slots to accept any combination of 11 kinds of plug-in modules, like a DMM module, multiple multiplexers, an actuator, a matrix switch module and a multifunction module.

RIGOL - M301 - DAQ System Mainframe+DMM. 5 slots for modules Multiplexers, Actuator, Matrix Switch.Multifunction DAQ System with included MC3065 DMM module.5 slots to accept any combination of 11 kinds of plug-in modules, like a DMM module, multiple multiplexers, an actuator, a matrix switch module and a multifunction module.

RIGOL - M302 - DAQ System Mainframe+DMM+MUX. 5 slots for Multiplexers, Actuator, Matrix Switch.Multifunction DAQ System with included MC3065 DMM module and MUX. 5 slots to accept any combination of 11 kinds of plug-in modules, like a DMM module, multiple multiplexers, an actuator, a matrix switch module and a multifunction module.

KEYSIGHT - U1733C - 100Hz/120Hz/1kHz/10kHz/100kHz Handheld LCR Meter The U1733C LCR meters allow you to measure frequencies as high as 100 kHz, a capability typically found only in benchtop meters. It come with a 3-year warranty which is backed by Keysight’s outstanding service and support. Now you can measure at frequencies as high as 100 kHz, a capability that is typically found only in benchtop meters. Auto identification conveniently displays component type and detailed component analysis such as Z, ESR, DCR, so you can get measurements done faster. Better yet, the battery lasts up to 16 hours, ideal for testing on the go. With the U1730 Series, you can perform quick, basic LCR measurements at your convenience, without burning a hole in your pocket.Highlights:- 20,000 counts resolution- 0.2% accuracy- Wide LCR ranges with 5 selectable test frequencies (100Hz, 120Hz, 1kHz, 10kHz, and 100kHz)- Auto identification (Ai) automatically determines and displays component type and measurements- Detailed component analysis with DCR, ESR, Z, D, Q, Ө functions- Battery life of 16 hours/Ac-powered- IR-to-USB connectivity for data logging to PC