KEYSIGH - N6781A The Keysight N6781A is a source / measure unit (SMU) designed specifically for the task of battery drain analysis. Whether the device under test (DUT) is an eBook reader, MP3 player, mobile phone, or pacemaker, the N6781A’s seamless measurement ranging, programmable output resistance, and auxiliary DVM combine the best set of advanced features on the market for battery drain analysis. When used with the 14585A Control and Analysis software, the N6781A becomes an even more powerful battery drain analysis solution, offering additional insights into your measurements.This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance are standard. Select from more than 30 different DC power modules, ranging in capability from basic to high precision, and in power from 20−300 W.Key features> For use with the N6700 Series mainframes (USB, LAN (LXI-C), GPIB): Low profile MPS or DC Power Analyzer> DC output ratings: 20 V, ±1 A or 6 V, ±3 A, 20 W> Voltage accuracy: 0.025% + 1.8 mV> Ripple and noise: 12 mV> Up and down-programming with resistive load typically 20 ms> Overvoltage, overcurrent, and overtemperature protection> Modules can operate at lower output power to stay within mainframe rating> Modules include a quick disconnect connectorOther features and benefits> Glitch-free sourcing and measurement — change output and measurement ranges without any glitches> Two-quadrant operation — perform as a voltage or current source or as a CV or CC electronic load> Four current measurement ranges — precisely capture the current levels of the DUT during different modes of operation> Excellent transient response — keep voltage or current stable during high-speed load changes> Fast modulation of DC — create waveforms up to 100 kHz to stimulate or load down the DUT> High-speed digitized measurements — capture / view the power consumption of the DUT up to every 5 µs with built-in 200 kHz digitizer

KEYSIGH - N6782A The Keysight N6782A is a source/measure unit (SMU) designed specifically for advanced functional testing of a device. The ability to modulate the output up to 100 kHz along with the capability to source and sink current (2-quadrant operation) makes the N6782A a perfect fit for advanced functional test of a variety of devices such as DC/DC converters, power management units, power amplifiers, and power management ICs. The input stage of the DUT can be stimulated by the fast sourcing and waveform capabilities. While the output stage can be loaded down and measured with the electronic load capabilities, providing a total test solution.This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance are standard. Select from more than 30 different DC power modules, ranging in capability from basic to high precision, and in power from 20−300 W.Key features> For use with the N6700 Series mainframes (USB, LAN (LXI-C), GPIB): Low profile MPS or DC Power Analyzer> DC output ratings: 20 V, ±1 A or 6 V, ±3 A, 20 W> Voltage accuracy: 0.025 % + 1.8 mV> Ripple and noise: 12 mV> Up and down-programming with resistive load typically 20 ms> Overvoltage, overcurrent, and overtemperature protection> Modules can operate at lower output power to stay within mainframe rating> Modules include a quick disconnect connectorOther features and benefits> Glitch-free sourcing and measurement ― change output and measurement ranges without any glitches> 2-quadrant operation ― perform as a voltage or current source or as a CV or CC electronic load> Four current measurement ranges ― precisely capture the current levels of the DUT during different modes of operation> Excellent transient response ― keep voltage or current stable during high-speed load changes> Fast modulation of DC ― create waveforms up to 100 kHz to stimulate or load down the DUT> High-speed digitized measurements ― capture/view the power consumption of the DUT up to every 5 µs with built-in 200 kHz digitizer

KEYSIGHT - N6791A The Keysight N6791A offers 1U height modular electronic DC load module for N6700C mainframes. Capable of sinking power up to 100W per channel and be configured with up to four modules in a mainframe.Single-wide module, up to 4 modules in mainframeMaximum 100 Watts sinking power per moduleVoltage: Up to 60VCurrent: Up to 20A Advanced operating modes: CV, CC, CR, CPArbitrary waveform generationHigh speed synchronized digitization of voltage and currentSuperior command processing time and current slew rateUSB, LAN, GPIB interfaces standardN6700C style user interface for ease of use and familiarityTesting multiple DC power conversion systems can be time consuming if each output must be tested sequentially and measurements are being performed through external equipment. Using the built-in measurement capabilities of N6791A electronic DC loads, all outputs can be measured simultaneously allowing multiple output power systems to be tested in a shorter period.

KEYSIGHT - N9321C -Basic 9 kHz to 4 GHz Spectrum Analyzer (BSA) The Keysight N932xC spectrum analyzer is a portable, swept spectrum analyzer with a maximum frequency from 4.0 GHz(N9321C) up to 20 GHz(N9324C). It can be widely used in an electronic manufacturing environment and in functional/final/QA test systems.The analyzer provides the enhanced usability as below:- Socket/Telnet remote control via USB, and LAN port.- The BSA PC Software provides further editing and data analysis functions.- The GPIB interface (option G01) makes the unit easily compatible with your GPIB test system.- Security features (Option SEC) allows user to erase all customized files and data in analyzer for security.The Keysight N932xC spectrum analyzer primary features and functions are described below:- Power Measurement Suite: The built-in one-button power measurement suite offers channel power, ACP, OBW, and TOI measurements, and contains a pass/fail testing capability with a mask for out-of-channel emissions measurement.- Precision Frequency Reference (Option PFR): The optional OCXO frequency reference provides the precise frequency measurement capability.- Spectrum Monitor (Option MNT): Provides the capability to analyze the stability of a signal over time. The analyzer can be used to monitor the signal capturing performance or intermittent event over extended periods of time.- High Sensitive Measurement (Option P04/P07/P13/P20): Includes an optional pre-amplifier to enable more sensitive measurements. This feature is a great help in analysis of low level signals.- High Accuracy Power Measurement: Supports Keysight U2000 series (option PWM) and U2020 series (option PWP) power sensors for high accuracy power measurement as a power meter.- Modulation Analysis Function: Provides optional AM/FM and ASK/FSK modulation analysis function. (AM/FM: Option-AMA ASK/FSK: Option-DMA)- Tracking Generator (Option TG4/TG7): Provides an RF source for scalar network analysis.- Baseband Channel (Option BB1 for N9321C/22C): Provides superior DANL and SSB between 9 kHz to 10 MHz. - Cable & Antenna Test (Option RM4/7; requires option TG4/7): Provides VSWR, return loss, cable loss and distance-to-fault function for reflection measurement. This option is only available for N9321C/N9322C.- Task Planner (Option TPN): Provides task planner function to integrate different measurements for test automation.- Time-gated Spectrum Analysis (Option TMG): Measures any one of several signals separated in time and exclude interfering signals.- Channel Scanner (Option SCN): Provide the channel scan function in spectrum monitoring, coverage test, and band clearance.- EMI filters and quasi-peak detector (Option EMC): Provide the EMI filters function and quasi-peak detector to make CISPR compliant EMI measurements.

KEYSIGHT - P9372A P9372A Keysight Streamline USB Vector Network Analyzer has following features and functions:  - Compact, portable, and easy to connect; - Dramatically reduces your size of test; - Frequency range from 300 kHz up to 9 GHz; - Ability to extend the number of test ports (max 4-port); - Same GUI and measurement science as Keysight high-performance VNAs; - Supports all Electronic Calibration (ECal) modules.

KEYSIGHT - U1733C - 100Hz/120Hz/1kHz/10kHz/100kHz Handheld LCR Meter The U1733C LCR meters allow you to measure frequencies as high as 100 kHz, a capability typically found only in benchtop meters. It come with a 3-year warranty which is backed by Keysight’s outstanding service and support. Now you can measure at frequencies as high as 100 kHz, a capability that is typically found only in benchtop meters. Auto identification conveniently displays component type and detailed component analysis such as Z, ESR, DCR, so you can get measurements done faster. Better yet, the battery lasts up to 16 hours, ideal for testing on the go. With the U1730 Series, you can perform quick, basic LCR measurements at your convenience, without burning a hole in your pocket.Highlights:- 20,000 counts resolution- 0.2% accuracy- Wide LCR ranges with 5 selectable test frequencies (100Hz, 120Hz, 1kHz, 10kHz, and 100kHz)- Auto identification (Ai) automatically determines and displays component type and measurements- Detailed component analysis with DCR, ESR, Z, D, Q, Ө functions- Battery life of 16 hours/Ac-powered- IR-to-USB connectivity for data logging to PC