RIGOL - DSG5206 - RF Signal Generator, 6 Ch, 9kHz to 20GHz, -30dBm to +25dBm, Phase noise -133 dBc/Hz@1Ghz. RF Signal Generator, 6 Ch, 9kHz to 20GHz, -30dBm to +25dBm, Phase noise -133 dBc/Hz@1Ghz TFT LCD 480x320 3.5-inch, Interfaces: USB3.0, LAN, HDMI

RIGOL - DSG5208 - RF Signal Generator, 8 Ch, 9kHz - 20GHz, -30dBm. to +25dBm, Phase noice -133 dBc/Hz@1Ghz. RF Signal Generator, 8 Ch, 9kHz - 20GHz, -30dBm to +25dBm, Phase noice -133 dBc/Hz@1Ghz TFT LCD 480x320 3.5-inch, Interfaces: USB3.0, LAN, HDMI

RIGOL - DSG815 - RF Signal Generator offers standard AM/FM/ analog modulation with a maximum frequency 1.5 GHz RF Signal Generator offers standard AM/FM/ analog modulation with a maximum frequency 1.5 GHz

RIGOL - DSG821 - RF Signal Generator offers standard AM/FM/ analog modulation with a maximum frequency 2.1 GHz  RF Signal Generator offers standard AM/FM/ analog modulation with a maximum frequency 2.1 GHz

RIGOL - DSG821A - RF Signal Generator 9 kHz to 2,1 GHz, inkl. I/Q Modulation and standard AM/FM/ analog modulation RF Signal Generator 9 kHz to 2,1 GHz, inkl. I/Q Modulation and standard AM/FM/ analog modulation

RIGOL - DSG830 - RF Signal Generator, 3 GHz, offers standard AM/FM/ analog modulation. RF Signal Generator, 3 GHz, offers standard AM/FM/ analog modulation.

RIGOL - DSG836 - RF Signal Generator, 3.6 GHz, offers standard AM/FM/ analog modulation. RF Signal Generator, 3.6 GHz, offers standard AM/FM/ analog modulation.

RIGOL - DSG836A - RF Signal Generator, 3.6 GHz, offers standard AM/FM/ analog modulation. Including IQ modulation. RF Signal Generator, 3.6 GHz, offers standard AM/FM/ analog modulation. Including IQ modulation.

KEYSIGHT - EDU33212A - Arbitrary Waveform Generator, 20 MHz, 2 Channels The Keysight EDU33210 Series function / arbitrary waveform generators offer the standard signals and features you expect — such as modulation, sweep, and burst. It also provides features that give you the capabilities and flexibility you need to get your job done quickly, no matter how complex. An intuitive, information-packed front-panel interface enables you to easily recall where you left off when your attention is focused elsewhere. And that is just the beginning. The EDU33210 Series 20 MHz function / arbitrary waveform generators ship standard with USB and LAN connectivity, making it easy for remote access and control. It supports operation using standard commands for programmable instruments (SCPI) language, interchangeable virtual instruments (IVI) driver, web browser, or Keysight's Pathwave BenchVue software. The EDU33210 Series 20 MHz function / arbitrary waveform generators feature a built-in USB memory port enabling you to store setup parameters with a USB flash drive. This feature maximizes efficiency when you need to restore the same setup into all the function / arbitrary waveform generators in your lab. It also enables you to load the arbitrary waveform signal to the function generator quickly.Key features:- Use the signature 7-inch color display for a simultaneous parameter set up, signal viewing, and editing.- Get six built-in modulation types and 17 popular waveforms to simulate typical applications for testing.- Acquire 16-bit arbitrary waveform capability with memory up to 8 M samples per channel.- Begin using the USB and LAN IO interface for remote connectivity.- Receive Keysight's PathWave BenchVue software to enable PC control.

KEYSIGHT - FG33531A - FG33531A, 1 Channel, 100 MHz Functional / Arbitrary Waveform GeneratorThe Keysight FG33530 Series function / arbitrary waveform generators offer up to 100 MHz with all the essential signals and features you expect, including modulation, sweep, and burst capabilities. Enjoy seamless navigation through the intuitive front-panel interface, allowing you to effortlessly adjust and review your settings for maximum efficiency. The Trueform technology replicates every waveform point, providing up to 16 Mega Samples (MSa) record length per channel. Enhance your waveform creation process with Keysight BenchVue software and BenchLink Waveform Builder Pro software, making it simple to create and edit even your most complex waveforms.Features:- Seven-inch color display for parameter setup, signal viewing, and editing- Jitter of less than 50 ps- Total harmonic distortion of less than 0.06%- Six built-in modulation types and seventeen popular waveforms to simulate typical applications for testing- 16-bit arbitrary waveform capability with maximum sampling rate of 320 MSa/s and memory of up to 16 MSa per channel.

KEYSIGHT - FG33532A - FG33532A, 2 Channel, 100 MHz Functional / Arbitrary Waveform GeneratorThe Keysight FG33530 Series function / arbitrary waveform generators offer up to 100 MHz with all the essential signals and features you expect, including modulation, sweep, and burst capabilities. Enjoy seamless navigation through the intuitive front-panel interface, allowing you to effortlessly adjust and review your settings for maximum efficiency. The Trueform technology replicates every waveform point, providing up to 16 Mega Samples (MSa) record length per channel. Enhance your waveform creation process with Keysight BenchVue software and BenchLink Waveform Builder Pro software, making it simple to create and edit even your most complex waveforms.Features:- Seven-inch color display for parameter setup, signal viewing, and editing- Jitter of less than 50 ps- Total harmonic distortion of less than 0.06%- Six built-in modulation types and seventeen popular waveforms to simulate typical applications for testing- 16-bit arbitrary waveform capability with maximum sampling rate of 320 MSa/s and memory of up to 16 MSa per channel.

GW INSTEK - GAG-810 - Low Sine Wave Distortion Generator 10 Hz - 1 MHzThe GAG-810 provide a convenient solution for low frequency (< 1MHz) signal generation, specifically for audio bandwidth. Intuitive and simple panel interface provides quick frequency and amplitude adjustment, with dial/key shortcuts to different ranges. Square wave generation covers digital application in addition to the traditional analog using sine waves. Distortion is kept at minimum level, especially at the audible frequency range: 0.02% or less distortion factor for 500Hz~20kHz. The external synchronization signal input helps collaborate with other measurement devices.Key features:- Frequency from 10Hz ~ 1MHz- 0.02% Low Sine Wave Distortion- 6 Steps Output Attenuator- EXT SYNC Function

GW INSTEK - GSG-2060 - 6 GHz Vector Signal Generator (GPIB) (CE), AM, FM, PM The GSG-2000 series is a basic RF vector signal/ signal generator that covers a frequency range from 9 kHz to 6 GHz. It is suitable for applications in communications education, RF component testing (such as amplifiers, antennas, and filters), automotive electronic signal testing, and IoT applications. It meets the testing requirements of RF products during production and development stages. Compared to its main competitors, the GSG-2000 series offers superior specifications including a wide amplitude output range of +20 dBm to -140 dBm, lower phase noise of -117 dBc/Hz, and high frequency accuracy with 10 ppm frequency stability and 2 ppm aging rate. Users have the option to enhance frequency stability and aging rate by selecting the OCXO (Oven Controlled Crystal Oscillator) option, which provides 10ppb stability and 0.1 ppm aging rate. For the signal modulation, the entire series has built-in AM, FM, and PM analog modulation, and GSG-2160 features a digital signal modulation function with a maximum bandwidth of 60 MHz digital signal output, supporting ASK, PSK, APSK, QAM, FSK, MSK, User-defined IQ, User-defined FSK modulation signals. Furthermore, the GSG-2000 series also provides LF signal and Pulse signal output. The LF signal allows users to output Sine, Square, Triangle/Ramp, Gaussian Noise signals, and the Pulse signal output can simulate pulse wave applications of various widths. In addition to the above signal outputs, GSG-2000 also provides AM/FM/digital IQ signal input, as well as independent output ports for digital I or Q signals. GSG-2000 adopts a seven-inch TFT LCD display that can fully display the parameters and status set by the user, and the series also provides USB, LAN, GPIB (option) communications interfaces, and provides standard SCPI-compatible commands to support remote control . GSG-2000 is designed for 3U high standard rack size. The GSG-2000 series is available in two models and the main differences are shown in the Datasheet.  Features: - Frequency range: 9 kHz ~ 6 GHz - Frequency resolution: 1 mHz - Standard 10 ppm frequency stability, 2 ppm aging rate - Optional AUX (OCXO): 10 ppb frequency stability, 0.1 ppm aging rate - Amplitude range: -140 dBm to +20 dBm - 0.01 dBm amplitude setting resolution - Amplitude setting unit: dBm, dBµV, Vrms - Phase noise: <-117 dBc/Hz (real) @1 GHz output and 20 kHz offset - The sampling speed of digital modulation signal (I/Q) output reaches 180MSa/s - Frequency/amplitude switching speed: ≤ 5 ms - Built-in LF/RF signal output, Pulse signal output - The series has built-in AM, FM, PM analog signal modulation functions - Supports IQ modulation signal output (GSG-2160 only) - Up to 60 MHz baseband I or Q modulation signal output - Up to 120 MHz RF I+Q modulation signal output - Built-in ASK, PSK, APSK, QAM, FSK, MSK, self-defined IQ/FSK digital signal modulation functions (GSG-2160) - Provides USB, LAN and GPIB (option), commands comply with SCPI standards

GW INSTEK - GSG-2160 - 6 GHz Vector Signal Generator (GPIB) (CE), AM, FM, PM, ASK, PSK, APSK, QAM, FSK, MSK, user define IQ, user defined FSKThe GSG-2000 series is a basic RF vector signal/ signal generator that covers a frequency range from 9 kHz to 6 GHz. It is suitable for applications in communications education, RF component testing (such as amplifiers, antennas, and filters), automotive electronic signal testing, and IoT applications. It meets the testing requirements of RF products during production and development stages.Compared to its main competitors, the GSG-2000 series offers superior specifications including a wide amplitude output range of +20 dBm to -140 dBm, lower phase noise of -117 dBc/Hz, and high frequency accuracy with 10 ppm frequency stability and 2 ppm aging rate. Users have the option to enhance frequency stability and aging rate by selecting the OCXO (Oven Controlled Crystal Oscillator) option, which provides 10ppb stability and 0.1 ppm aging rate.For the signal modulation, the entire series has built-in AM, FM, and PM analog modulation, and GSG-2160 features a digital signal modulation function with a maximum bandwidth of 60 MHz digital signal output, supporting ASK, PSK, APSK, QAM, FSK, MSK, User-defined IQ, User-defined FSK modulation signals.Furthermore, the GSG-2000 series also provides LF signal and Pulse signal output. The LF signal allows users to output Sine, Square, Triangle/Ramp, Gaussian Noise signals, and the Pulse signal output can simulate pulse wave applications of various widths. In addition to the above signal outputs, GSG-2000 also provides AM/FM/digital IQ signal input, as well as independent output ports for digital I or Q signals.GSG-2000 adopts a seven-inch TFT LCD display that can fully display the parameters and status set by the user, and the series also provides USB, LAN, GPIB (option) communications interfaces, and provides standard SCPI-compatible commands to support remote control . GSG-2000 is designed for 3U high standard rack size.The GSG-2000 series is available in two models and the main differences are shown in the Datasheet.Features: - Frequency range: 9 kHz ~ 6 GHz - Frequency resolution: 1 mHz - Standard 10 ppm frequency stability, 2 ppm aging rate- Optional AUX (OCXO): 10 ppb frequency stability, 0.1 ppm aging rate - Amplitude range: -140 dBm to +20 dBm - 0.01 dBm amplitude setting resolution - Amplitude setting unit: dBm, dBµV, Vrms - Phase noise: <-117 dBc/Hz (real) @1 GHz output and 20 kHz offset - The sampling speed of digital modulation signal (I/Q) output reaches 180MSa/s - Frequency/amplitude switching speed: ≤ 5 ms - Built-in LF/RF signal output, Pulse signal output - The series has built-in AM, FM, PM analog signal modulation functions - Supports IQ modulation signal output (GSG-2160 only) - Up to 60 MHz baseband I or Q modulation signal output - Up to 120 MHz RF I+Q modulation signal output - Built-in ASK, PSK, APSK, QAM, FSK, MSK, self-defined IQ/FSK digital signal modulation functions (GSG-2160) - Provides USB, LAN and GPIB (option), commands comply with SCPI standards

KEYSIGHT - N5171B-503  - EXG X-Series RF Analog Signal Generator, 9 kHz to 3 GHz The Keysight N5171B EXG X-Series RF analog mid-performance signal generator offer 9 kHz to 6 GHz frequency coverage, optimized for manufacturing with faster throughput and greater uptime at the right price. N5171B EXG X-Series Analog Signal Generator allows to:- Achieve faster throughput and greater uptime with the cost-effective performance optimized for manufacturing test- Perform basic parametric testing of components and functional verification of receivers with industry-leading output power- Thoroughly verify receiver performance by simulating complex analog modulation scenarios with multi-function generator capability- Minimize downtime and expenses with self-maintenance solutions and low-cost repairs.

RIGOL - RM-DG5000 - Rack mount kit for DG5000 series. Rack mount kit for DG5000 series.

GW INSTEK - SFG-1003 - DDS Function Generator 3 MHz The SFG-1000 Series, an economic function generator with high accuracy and high stability output, are designed based on the DDS (Direct Digital Synthesized) technology embedded in a large scale FPGA.The 3MHz frequency range and the output waveform selection of Sine, Square, Triangle and TTL available in the SFG-1000 Series adequately provide the fundamental functions to ensure high confidence in test results. The DDS technology at an affordable price gives a high value solution to the users who need a signal source for accurate but simple measurement applications.Key features:- DDS Technique and FPGA Chip Design- Frequency Range : 0.1Hz~3MHz- High Frequency Accuracy : ± 20ppm- High Frequency Stability : ± 20ppm- Max. Frequency Resolution : 100mHz- Low Distortion Sine Wave : -55dBc, 0.1Hz~200kHz

GW INSTEK - SFG-1013 - Dual Display DDS Function Generator 3MHz The SFG-1000 Series, an economic function generator with high accuracy and high stability output, are designed based on the DDS (Direct Digital Synthesized) technology embedded in a large scale FPGA.The 3MHz frequency range and the output waveform selection of Sine, Square, Triangle and TTL available in the SFG-1000 Series adequately provide the fundamental functions to ensure high confidence in test results. The DDS technology at an affordable price gives a high value solution to the users who need a signal source for accurate but simple measurement applications.Key features:- DDS Technique and FPGA Chip Design- Frequency Range : 0.1Hz~3MHz- High Frequency Accuracy : ± 20ppm- High Frequency Stability : ± 20ppm- Max. Frequency Resolution : 100mHz- Low Distortion Sine Wave : -55dBc, 0.1Hz~200kHz