KEYSIGHT - N3304A - Single-slot DC electronic load module, 60 V, 60 A, 300 WThe Keysight N3304A is a 300 W (0−60 A, 0−60 V) electronic load module for use in either the N3300A or N3301A electronic load mainframe in system applications.The N3300 Series supports up to six channels, each with a unique maximum voltage and current. They allow the design of a flexible automated test equipment (ATE) system to verify many types of power supplies, DC-to-DC converters, and batteries. Add additional modules to test multiple power sources simultaneously. Each module includes a 16-bit voltage, current, and power measurement system.Key features:- Choice of half-rack width or full-rack width mainframe- Constant current, constant voltage, and constant resistance modes- Built-in transient generator- 16-bit voltage and current measurements captured simultaneously- Stable operation down to 0 V- Modular design for system flexibility- Fast command processing and settling times- Available interfaces: analog, RS232, and GPIB

KEYSIGHT - N5171B-503  - EXG X-Series RF Analog Signal Generator, 9 kHz to 3 GHz The Keysight N5171B EXG X-Series RF analog mid-performance signal generator offer 9 kHz to 6 GHz frequency coverage, optimized for manufacturing with faster throughput and greater uptime at the right price. N5171B EXG X-Series Analog Signal Generator allows to:- Achieve faster throughput and greater uptime with the cost-effective performance optimized for manufacturing test- Perform basic parametric testing of components and functional verification of receivers with industry-leading output power- Thoroughly verify receiver performance by simulating complex analog modulation scenarios with multi-function generator capability- Minimize downtime and expenses with self-maintenance solutions and low-cost repairs.

KEYSIGHT - N6700CPower supplies and electronic loads are a fundamental component of every test system in industries including aerospace and defense, consumer electronics, computers and peripherals, communications, semiconductor and automotive electronics. Today’s complex automatic test equipment (ATE) systems often require multiple power sources or electronic loads. Test system designers are challenged to keep costs down by reducing rack space occupied by these multiple power supplies or electronic loads and to continually increase test system throughput. The Keysight Technologies, Inc. N6700 Low-Profile Modular Power System (MPS) is a 1U (rack unit) high, multiple-output programmable DC power supply or electronic load system that enables test system integrators to optimize performance, power and price to match test needs.Key features:• 400 W mainframe• Modular solution with 1U low-profile• Up to four outputs per mainframe• Mix and match module power and performance levels• Choose modules from three levels of performance• Sink current with DC electronic load modules• Fast command processing and settling times• Interfaces available — LAN (LXI Core), USB, GPIB

KEYSIGHT - N6701CAutomated test equipment (ATE) systems often require more than one power source. The Keysight N6700 Series provides up to four outputs per mainframe. An independent module is the source for each output, allowing for the customization of voltage, current, and performance. DC electronic load modules are also available, allowing testing of power sources in the same 1U high mainframe.Key features:600 W mainframe; Modular solution with 1U low-profile; Up to four outputs per mainframe; Mix and match module power and performance levels; Choose modules from three levels of performance; Sink current with DC electronic load modules; Fast command processing and settling times; Interfaces available — LAN (LXI Core), USB, GPIB.

KEYSIGHT - N6700CPower supplies and electronic loads are a fundamental component of every test system in industries including aerospace and defense, consumer electronics, computers and peripherals, communications, semiconductor and automotive electronics. Today’s complex automatic test equipment (ATE) systems often require multiple power sources or electronic loads. Test system designers are challenged to keep costs down by reducing rack space occupied by these multiple power supplies or electronic loads and to continually increase test system throughput. The Keysight Technologies, Inc. N6700 Low-Profile Modular Power System (MPS) is a 1U (rack unit) high, multiple-output programmable DC power supply or electronic load system that enables test system integrators to optimize performance, power and price to match test needs.Key features:• 400 W mainframe• Modular solution with 1U low-profile• Up to four outputs per mainframe• Mix and match module power and performance levels• Choose modules from three levels of performance• Sink current with DC electronic load modules• Fast command processing and settling times• Interfaces available — LAN (LXI Core), USB, GPIB

KEYSIGHT - N6705C The Keysight Technologies, Inc. N6705 DC Power Analyzer represents an entirely new instrument category for R&D engineers. It provides unrivaled productivity gains when sourcing or loading and measuring DC voltage and current into a DUT. Using the Keysight N6705 DC Power Analyzer, R&D engineers can gain insights into the DUT’s power consumption in minutes without writing a single line of code. It provides an easy-to-use interface, with all sourcing or loading and measuring functions available from the front panel. Key features: • Number of Outputs: up to 4• Total Power: 400 to 1200 W• Ripple and Noise: < 350 µVrms Accuracy:• Ampmeter accuracy: Up to 0.025% + 8 nA; up to 18 bits• Voltmeter accuracy: Up to 0.025% + 50 µV; up to 18 bits• Arbitrary waveform generator function: Bandwidth up to 100 kHz, output power up to 500 W• Data logger function: Measurement interval from 20 µs to 60 seconds, with a maximum of 500 M readings per second• Scope function: Digitizes voltage and current up to 200 kHz, 512 kpts; up to 18 bits• Modern Connectivity: USB, LAN, and GPIB

KEYSIGH - N6752AThe Keysight N6752A is a 100 W high-performance, autoranging DC power module that provides low noise, high accuracy and programming speeds that are up to 10 to 50 times faster than other programmable power supplies. Optional high-speed test extension offers an oscilloscope-like digitizer that increases measurement accuracy when viewing high-speed transient or pulse events within the device-under-test (DUT).This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance are standard. Select from more than 30 different DC power modules, ranging in capability from basic to high precision, and in power from 20−500 W.Key features> For use with the N6700 Series mainframes (USB, LAN (LXI-C), GPIB): Low profile MPS or DC Power Analyzer> DC output ratings: 50 V, 10 A, 100 W> Voltage accuracy: 0.06% + 19 mV> Ripple and noise: 4.5 mV> Up and down-programming with resistive load typically 20 ms> Overvoltage, overcurrent, and overtemperature protection> Basic modules are single wide allowing four per mainframe> Modules can operate at lower output power to stay within mainframe rating> Modules include a quick disconnect connector

KEYSIGH - N6762A The Keysight N6762A is a 100 W precision DC power module that provides low noise, and precise control and measurements in the milliampere and microampere region with the ability to simultaneously digitize voltage and current, and capture those measurements in an oscilloscope-like data buffer. For leakage current or sleep-mode current measurements, add option 2UA for measurement capability down to 1 μA.This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance are standard. Select from more than 30 different DC power modules, ranging in capability from basic to high precision, and in power from 20−500 W.Key features> For use with the N6700 Series mainframes (USB, LAN (LXI-C), GPIB): Low profile MPS or DC Power Analyzer> DC output ratings: 50 V, 3 A, 100 W> Voltage accuracy: 0.016% + 6 mV> Ripple and noise: 4.5 mV> Up and down-programming with resistive load typically 20 ms> Overvoltage, overcurrent, and overtemperature protection> Basic modules are single wide allowing four per mainframe> Modules can operate at lower output power to stay within mainframe rating> Modules include a quick disconnect connector

KEYSIGH - N6774A The Keysight N6774A is a 300 W basic DC power module that provides programmable voltage and current, measurement and protection features at a very economical price, making these modules suitable to power the DUT or to provide power for ATE system resources such as fixture control.This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance are standard. Select from more than 30 different DC power modules, ranging in capability from basic to high precision, and in power from 20−500 W.Key features> For use with the N6700 Series mainframes (USB, LAN (LXI-C), GPIB): Low profile MPS or DC Power Analyzer> DC output ratings: 35 V, 8.5 A, 300 W> Voltage accuracy: 0.1% + 35 mV> Ripple and noise: 22 mV> Up and down-programming with resistive load typically 20 ms> Overvoltage, overcurrent, and overtemperature protection> Basic modules are single wide allowing four per mainframe> Modules can operate at lower output power to stay within mainframe rating> Modules include a quick disconnect connector

KEYSIGH - N6781A The Keysight N6781A is a source / measure unit (SMU) designed specifically for the task of battery drain analysis. Whether the device under test (DUT) is an eBook reader, MP3 player, mobile phone, or pacemaker, the N6781A’s seamless measurement ranging, programmable output resistance, and auxiliary DVM combine the best set of advanced features on the market for battery drain analysis. When used with the 14585A Control and Analysis software, the N6781A becomes an even more powerful battery drain analysis solution, offering additional insights into your measurements.This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance are standard. Select from more than 30 different DC power modules, ranging in capability from basic to high precision, and in power from 20−300 W.Key features> For use with the N6700 Series mainframes (USB, LAN (LXI-C), GPIB): Low profile MPS or DC Power Analyzer> DC output ratings: 20 V, ±1 A or 6 V, ±3 A, 20 W> Voltage accuracy: 0.025% + 1.8 mV> Ripple and noise: 12 mV> Up and down-programming with resistive load typically 20 ms> Overvoltage, overcurrent, and overtemperature protection> Modules can operate at lower output power to stay within mainframe rating> Modules include a quick disconnect connectorOther features and benefits> Glitch-free sourcing and measurement — change output and measurement ranges without any glitches> Two-quadrant operation — perform as a voltage or current source or as a CV or CC electronic load> Four current measurement ranges — precisely capture the current levels of the DUT during different modes of operation> Excellent transient response — keep voltage or current stable during high-speed load changes> Fast modulation of DC — create waveforms up to 100 kHz to stimulate or load down the DUT> High-speed digitized measurements — capture / view the power consumption of the DUT up to every 5 µs with built-in 200 kHz digitizer

KEYSIGH - N6782A The Keysight N6782A is a source/measure unit (SMU) designed specifically for advanced functional testing of a device. The ability to modulate the output up to 100 kHz along with the capability to source and sink current (2-quadrant operation) makes the N6782A a perfect fit for advanced functional test of a variety of devices such as DC/DC converters, power management units, power amplifiers, and power management ICs. The input stage of the DUT can be stimulated by the fast sourcing and waveform capabilities. While the output stage can be loaded down and measured with the electronic load capabilities, providing a total test solution.This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance are standard. Select from more than 30 different DC power modules, ranging in capability from basic to high precision, and in power from 20−300 W.Key features> For use with the N6700 Series mainframes (USB, LAN (LXI-C), GPIB): Low profile MPS or DC Power Analyzer> DC output ratings: 20 V, ±1 A or 6 V, ±3 A, 20 W> Voltage accuracy: 0.025 % + 1.8 mV> Ripple and noise: 12 mV> Up and down-programming with resistive load typically 20 ms> Overvoltage, overcurrent, and overtemperature protection> Modules can operate at lower output power to stay within mainframe rating> Modules include a quick disconnect connectorOther features and benefits> Glitch-free sourcing and measurement ― change output and measurement ranges without any glitches> 2-quadrant operation ― perform as a voltage or current source or as a CV or CC electronic load> Four current measurement ranges ― precisely capture the current levels of the DUT during different modes of operation> Excellent transient response ― keep voltage or current stable during high-speed load changes> Fast modulation of DC ― create waveforms up to 100 kHz to stimulate or load down the DUT> High-speed digitized measurements ― capture/view the power consumption of the DUT up to every 5 µs with built-in 200 kHz digitizer

KEYSIGHT - N6791A The Keysight N6791A offers 1U height modular electronic DC load module for N6700C mainframes. Capable of sinking power up to 100W per channel and be configured with up to four modules in a mainframe.Single-wide module, up to 4 modules in mainframeMaximum 100 Watts sinking power per moduleVoltage: Up to 60VCurrent: Up to 20A Advanced operating modes: CV, CC, CR, CPArbitrary waveform generationHigh speed synchronized digitization of voltage and currentSuperior command processing time and current slew rateUSB, LAN, GPIB interfaces standardN6700C style user interface for ease of use and familiarityTesting multiple DC power conversion systems can be time consuming if each output must be tested sequentially and measurements are being performed through external equipment. Using the built-in measurement capabilities of N6791A electronic DC loads, all outputs can be measured simultaneously allowing multiple output power systems to be tested in a shorter period.

KEYSIGHT - N9321C -Basic 9 kHz to 4 GHz Spectrum Analyzer (BSA) The Keysight N932xC spectrum analyzer is a portable, swept spectrum analyzer with a maximum frequency from 4.0 GHz(N9321C) up to 20 GHz(N9324C). It can be widely used in an electronic manufacturing environment and in functional/final/QA test systems.The analyzer provides the enhanced usability as below:- Socket/Telnet remote control via USB, and LAN port.- The BSA PC Software provides further editing and data analysis functions.- The GPIB interface (option G01) makes the unit easily compatible with your GPIB test system.- Security features (Option SEC) allows user to erase all customized files and data in analyzer for security.The Keysight N932xC spectrum analyzer primary features and functions are described below:- Power Measurement Suite: The built-in one-button power measurement suite offers channel power, ACP, OBW, and TOI measurements, and contains a pass/fail testing capability with a mask for out-of-channel emissions measurement.- Precision Frequency Reference (Option PFR): The optional OCXO frequency reference provides the precise frequency measurement capability.- Spectrum Monitor (Option MNT): Provides the capability to analyze the stability of a signal over time. The analyzer can be used to monitor the signal capturing performance or intermittent event over extended periods of time.- High Sensitive Measurement (Option P04/P07/P13/P20): Includes an optional pre-amplifier to enable more sensitive measurements. This feature is a great help in analysis of low level signals.- High Accuracy Power Measurement: Supports Keysight U2000 series (option PWM) and U2020 series (option PWP) power sensors for high accuracy power measurement as a power meter.- Modulation Analysis Function: Provides optional AM/FM and ASK/FSK modulation analysis function. (AM/FM: Option-AMA ASK/FSK: Option-DMA)- Tracking Generator (Option TG4/TG7): Provides an RF source for scalar network analysis.- Baseband Channel (Option BB1 for N9321C/22C): Provides superior DANL and SSB between 9 kHz to 10 MHz. - Cable & Antenna Test (Option RM4/7; requires option TG4/7): Provides VSWR, return loss, cable loss and distance-to-fault function for reflection measurement. This option is only available for N9321C/N9322C.- Task Planner (Option TPN): Provides task planner function to integrate different measurements for test automation.- Time-gated Spectrum Analysis (Option TMG): Measures any one of several signals separated in time and exclude interfering signals.- Channel Scanner (Option SCN): Provide the channel scan function in spectrum monitoring, coverage test, and band clearance.- EMI filters and quasi-peak detector (Option EMC): Provide the EMI filters function and quasi-peak detector to make CISPR compliant EMI measurements.

RIGOL - NFP-3 - Near Field Probe kit for EMI, EMC Measurement. Set of 4 H field Probes. 30 MHz to 3 GHz. SMB (male) Near Field Probe kit for EMI, EMC Measurements. Set of 4 H field Probes. 30 MHz to 3 GHz. SMB (male)

RIGOL - OCXO-C08 - High Stable Reference Clock High Stable Reference Clock

RIGOL - OCXO-D08 - High Stability Clock (OCXO) High Stability Clock (OCXO)

KEYSIGHT - P9372A P9372A Keysight Streamline USB Vector Network Analyzer has following features and functions:  - Compact, portable, and easy to connect; - Dramatically reduces your size of test; - Frequency range from 300 kHz up to 9 GHz; - Ability to extend the number of test ports (max 4-port); - Same GUI and measurement science as Keysight high-performance VNAs; - Supports all Electronic Calibration (ECal) modules.

RIGOL - PA1011 - 10W Power Amplifier 10W Power Amplifier

RIGOL - PCA1030 - 50 MHz, 30 A Current Probe for 7000 & 8000 Series Oscilloscopes 50 MHz, 30 A Current Probe for 7000 & 8000 Series Oscilloscopes

RIGOL - PCA1030B - 50MHz, 30A Current Probe 50MHz, 30A Current Probe

RIGOL - PCA1150 - 10 MHz, 300 A Current Probe for 7000 & 8000 Series Oscilloscopes 10 MHz, 300 A Current Probe for 7000 & 8000 Series Oscilloscopes

RIGOL - PCA1500 - 2MHz,500A Current Probe 2MHz,500A Current Probe

RIGOL - PCA2030 - 100 MHz, 30 A Current Probe for 7000 & 8000 Series Oscilloscopes 100 MHz, 30 A Current Probe for 7000 & 8000 Series Oscilloscopes

SENSEPEEK - PCBITE-7021 - Probe MMCX adaptor 3.5mm A MMCX adaptor compatible with the SQG15 and SQG30 AC/DC probes