GW INSTEK -  PSW-1080L224 - 40V/27A*2 80V/13.5A*1 1080W Multi-Range D.C. Power SupplyPSW-Multi Series is a dual-channel or triple-channel wide range output programmable switching DC power supply. The maximum output power can reach 1080W. There are 13 dual-channel models with a rated power of 720W, and 24 triple-channel models with a rated power dual of 1080W. The rated voltages of low voltage modules are 30V, 40V, 80V, 160V. The rated voltages of high voltage modules are 250V and 800V. The CV/CC priority selection of the PSW-Multi Series is a very useful feature for DUT protection. The conventional power supply normally operates under CV mode when the power output is turned on. This could bring a high inrush current to the capacitive load or current intensive load at the power output-on stage. Taking the I-V curve verification of LED as an example, it becomes a very challenging task to perform this measurement using a conventional power supply. With LED connected to a power supply under CV mode as the initial setting, when the power output is turned on and the voltage rises to the LED forward voltage, the current will suddenly peak up and exceed the preset value of current limit. Upon detecting this high current, the power supply starts the transition from CV mode to CC mode. Though the current becomes stable after the CC mode being activated, the current spike occurred at the CV and CC crossover point may possibly damage the DUT. At the power output-on stage, the PSW-Multi Series is able to operate under CC priority to limit the current spike occurred at the threshold voltage and therefore protects DUT from the inrush current damage. The adjustable slew rate of the PSW-Multi Series allows users to set for either output voltage or output current, a specific rise time from low to high level transition, and a specific fall time from high to low level transition. This facilitates the characteristic verification of a DUT during voltage or current level changes with controllable slew rates. Most manufacturing tests of lighting device or large capacitor during power output-on are associated with the occurrence of high surge current, which can greatly reduce the life time of the DUT. To prevent inrush current from damaging current-intensive devices, a smooth and slow voltage transition during power On-Off can significantly reduce the pike current and protect the device from high current damage.The OVP and OCP are provided with the PSW-Multi Series. Both OVP and OCP levels can be selected, with default level set at 110%, of the rated voltage/current of the power supply. When any of the protection levels is tripped, the power output will be switched off to protect the DUT. The PSW-Multi Series provides USB Host/Device and LAN interfaces as standard, GPIB-USB adapter and RS232-USB cable as optional. The LabVIEW driver and the Data Logging PC software are supported on all the available interfaces. An analog control/monitoring connector is also available on the rear panel for external control of power On/Off and external monitoring of power output Voltage and Current.Features:Multi-channel: 1080W for triple-channel models; output latency between channels with the same voltage module is less than 0.1msMultiple voltage combinations: low voltage combinations can be selected from 30V/40V/80V/160V; high voltage combinations can be selected from 250V/800VAdvanced web server: executes SCPI commands; controls through the server; data log; edit sequenceCC/CV priority mode selection is ideal for battery and LED industriesAdjustable slew rateHigh efficiency and high power density power supplyStandard communications interfaces: LAN, USB, external analog remote control terminalOptional communications interfaces: GPIB-USB adapter, RS232-USB cableSupport LabVIEW Driver

GW INSTEK - PSW-1080L225 - 40V/27A*2 160V/7.2A*1 1080W Multi-Range D.C. Power SupplyPSW-Multi Series is a dual-channel or triple-channel wide range output programmable switching DC power supply. The maximum output power can reach 1080W. There are 13 dual-channel models with a rated power of 720W, and 24 triple-channel models with a rated power dual of 1080W. The rated voltages of low voltage modules are 30V, 40V, 80V, 160V. The rated voltages of high voltage modules are 250V and 800V. The CV/CC priority selection of the PSW-Multi Series is a very useful feature for DUT protection. The conventional power supply normally operates under CV mode when the power output is turned on. This could bring a high inrush current to the capacitive load or current intensive load at the power output-on stage. Taking the I-V curve verification of LED as an example, it becomes a very challenging task to perform this measurement using a conventional power supply. With LED connected to a power supply under CV mode as the initial setting, when the power output is turned on and the voltage rises to the LED forward voltage, the current will suddenly peak up and exceed the preset value of current limit. Upon detecting this high current, the power supply starts the transition from CV mode to CC mode. Though the current becomes stable after the CC mode being activated, the current spike occurred at the CV and CC crossover point may possibly damage the DUT. At the power output-on stage, the PSW-Multi Series is able to operate under CC priority to limit the current spike occurred at the threshold voltage and therefore protects DUT from the inrush current damage.The adjustable slew rate of the PSW-Multi Series allows users to set for either output voltage or output current, a specific rise time from low to high level transition, and a specific fall time from high to low level transition. This facilitates the characteristic verification of a DUT during voltage or current level changes with controllable slew rates. Most manufacturing tests of lighting device or large capacitor during power output-on are associated with the occurrence of high surge current, which can greatly reduce the life time of the DUT. To prevent inrush current from damaging current-intensive devices, a smooth and slow voltage transition during power On-Off can significantly reduce the pike current and protect the device from high current damage.The OVP and OCP are provided with the PSW-Multi Series. Both OVP and OCP levels can be selected, with default level set at 110%, of the rated voltage/current of the power supply. When any of the protection levels is tripped, the power output will be switched off to protect the DUT. The PSW-Multi Series provides USB Host/Device and LAN interfaces as standard, GPIB-USB adapter and RS232-USB cable as optional. The LabVIEW driver and the Data Logging PC software are supported on all the available interfaces. An analog control/monitoring connector is also available on the rear panel for external control of power On/Off and external monitoring of power output Voltage and Current.Features:  - Multi-channel: 1080W for triple-channel models; output latency between channels with the same voltage module is less than 0.1ms- Multiple voltage combinations: low voltage combinations can be selected from 30V/40V/80V/160V; high voltage combinations can be selected from 250V/800V- Advanced web server: executes SCPI commands; controls through the server; data log; edit sequence- CC/CV priority mode selection is ideal for battery and LED industries- Adjustable slew rate- High efficiency and high power density power supply- Standard communications interfaces: LAN, USB, external analog remote control terminal- Optional communications interfaces: GPIB-USB adapter, RS232-USB cable- Support LabVIEW Driver

GW INSTEK - PSW-1080L244 - 40V/27A*1 80V/13.5A*2 1080W Multi-Range D.C. Power SupplyPSW-Multi Series is a dual-channel or triple-channel wide range output programmable switching DC power supply. The maximum output power can reach 1080W. There are 13 dual-channel models with a rated power of 720W, and 24 triple-channel models with a rated power dual of 1080W. The rated voltages of low voltage modules are 30V, 40V, 80V, 160V. The rated voltages of high voltage modules are 250V and 800V. The CV/CC priority selection of the PSW-Multi Series is a very useful feature for DUT protection. The conventional power supply normally operates under CV mode when the power output is turned on. This could bring a high inrush current to the capacitive load or current intensive load at the power output-on stage. Taking the I-V curve verification of LED as an example, it becomes a very challenging task to perform this measurement using a conventional power supply. With LED connected to a power supply under CV mode as the initial setting, when the power output is turned on and the voltage rises to the LED forward voltage, the current will suddenly peak up and exceed the preset value of current limit. Upon detecting this high current, the power supply starts the transition from CV mode to CC mode. Though the current becomes stable after the CC mode being activated, the current spike occurred at the CV and CC crossover point may possibly damage the DUT. At the power output-on stage, the PSW-Multi Series is able to operate under CC priority to limit the current spike occurred at the threshold voltage and therefore protects DUT from the inrush current damage.The adjustable slew rate of the PSW-Multi Series allows users to set for either output voltage or output current, a specific rise S time from low to high level transition, and a specific fall time from high to low level transition. This facilitates the characteristic verification of a DUT during voltage or current level changes with controllable slew rates. Most manufacturing tests of lighting device or large capacitor during power output-on are associated with the occurrence of high surge current, which can greatly reduce the life time of the DUT. To prevent inrush current from damaging current-intensive devices, a smooth and slow voltage transition during power On-Off can significantly reduce the pike current and protect the device from high current damage.The OVP and OCP are provided with the PSW-Multi Series. Both OVP and OCP levels can be selected, with default level set at 110%, of the rated voltage/current of the power supply. When any of the protection levels is tripped, the power output will be switched off to protect the DUT. The PSW-Multi Series provides USB Host/Device and LAN interfaces as standard, GPIB-USB adapter and RS232-USB cable as optional. The LabVIEW driver and the Data Logging PC software are supported on all the available interfaces. An analog control/monitoring connector is also available on the rear panel for external control of power On/Off and external monitoring of power output Voltage and Current.Features:- Multi-channel: 1080W for triple-channel models; output latency between channels with the same voltage module is less than 0.1ms- Multiple voltage combinations: low voltage combinations can be selected from 30V/40V/80V/160V; high voltage combinations can be selected from 250V/800V- Advanced web server: executes SCPI commands; controls through the server; data log; edit sequence- CC/CV priority mode selection is ideal for battery and LED industries- Adjustable slew rate- High efficiency and high power density power supply- Standard communications interfaces: LAN, USB, external analog remote control terminal- Optional communications interfaces: GPIB-USB adapter, RS232-USB cable- Support LabVIEW Driver

GW INSTEK - PSW-1080L245 - 40V/27A*1 80V/13.5A*1 160V/7.2A*1 1080W Multi-Range D.C. Power SupplyPSW-Multi Series is a dual-channel or triple-channel wide range output programmable switching DC power supply. The maximum output power can reach 1080W. There are 13 dual-channel models with a rated power of 720W, and 24 triple-channel models with a rated power dual of 1080W. The rated voltages of low voltage modules are 30V, 40V, 80V, 160V. The rated voltages of high voltage modules are 250V and 800V. The CV/CC priority selection of the PSW-Multi Series is a very useful feature for DUT protection. The conventional power supply normally operates under CV mode when the power output is turned on. This could bring a high inrush current to the capacitive load or current intensive load at the power output-on stage. Taking the I-V curve verification of LED as an example, it becomes a very challenging task to perform this measurement using a conventional power supply. With LED connected to a power supply under CV mode as the initial setting, when the power output is turned on and the voltage rises to the LED forward voltage, the current will suddenly peak up and exceed the preset value of current limit. Upon detecting this high current, the power supply starts the transition from CV mode to CC mode. Though the current becomes stable after the CC mode being activated, the current spike occurred at the CV and CC crossover point may possibly damage the DUT. At the power output-on stage, the PSW-Multi Series is able to operate under CC priority to limit the current spike occurred at the threshold voltage and therefore protects DUT from the inrush current damage.The adjustable slew rate of the PSW-Multi Series allows users to set for either output voltage or output current, a specific rise time from low to high level transition, and a specific fall time from high to low level transition. This facilitates the characteristic verification of a DUT during voltage or current level changes with controllable slew rates. Most manufacturing tests of lighting device or large capacitor during power output-on are associated with the occurrence of high surge current, which can greatly reduce the life time of the DUT. To prevent inrush current from damaging current-intensive devices, a smooth and slow voltage transition during power On-Off can significantly reduce the pike current and protect the device from high current damage.The OVP and OCP are provided with the PSW-Multi Series. Both OVP and OCP levels can be selected, with default level set at 110%, of the rated voltage/current of the power supply. When any of the protection levels is tripped, the power output will be switched off to protect the DUT. The PSW-Multi Series provides USB Host/Device and LAN interfaces as standard, GPIB-USB adapter and RS232-USB cable as optional. The LabVIEW driver and the Data Logging PC software are supported on all the available interfaces. An analog control/monitoring connector is also available on the rear panel for external control of power On/Off and external monitoring of power output Voltage and Current.Features: - Multi-channel: 1080W for triple-channel models; output latency between channels with the same voltage module is less than 0.1ms- Multiple voltage combinations: low voltage combinations can be selected from 30V/40V/80V/160V; high voltage combinations can be selected from 250V/800V- Advanced web server: executes SCPI commands; controls through the server; data log; edit sequence- CC/CV priority mode selection is ideal for battery and LED industries- Adjustable slew rate- High efficiency and high power density power supply- Standard communications interfaces: LAN, USB, external analog remote control terminal- Optional communications interfaces: GPIB-USB adapter, RS232-USB cable- Support LabVIEW Driver

GW INSTEK - PSW-1080L255 - 40V/27A*1 160V/7.2A*2 1080W Multi-Range D.C. Power SupplyPSW-Multi Series is a dual-channel or triple-channel wide range output programmable switching DC power supply. The maximum output power can reach 1080W. There are 13 dual-channel models with a rated power of 720W, and 24 triple-channel models with a rated power dual of 1080W. The rated voltages of low voltage modules are 30V, 40V, 80V, 160V. The rated voltages of high voltage modules are 250V and 800V. The CV/CC priority selection of the PSW-Multi Series is a very useful feature for DUT protection. The conventional power supply normally operates under CV mode when the power output is turned on. This could bring a high inrush current to the capacitive load or current intensive load at the power output-on stage. Taking the I-V curve verification of LED as an example, it becomes a very challenging task to perform this measurement using a conventional power supply. With LED connected to a power supply under CV mode as the initial setting, when the power output is turned on and the voltage rises to the LED forward voltage, the current will suddenly peak up and exceed the preset value of current limit. Upon detecting this high current, the power supply starts the transition from CV mode to CC mode. Though the current becomes stable after the CC mode being activated, the current spike occurred at the CV and CC crossover point may possibly damage the DUT. At the power output-on stage, the PSW-Multi Series is able to operate under CC priority to limit the current spike occurred at the threshold voltage and therefore protects DUT from the inrush current damage.The adjustable slew rate of the PSW-Multi Series allows users to set for either output voltage or output current, a specific rise time from low to high level transition, and a specific fall time from high to low level transition. This facilitates the characteristic verification of a DUT during voltage or current level changes with controllable slew rates. Most manufacturing tests of lighting device or large capacitor during power output-on are associated with the occurrence of high surge current, which can greatly reduce the life time of the DUT. To prevent inrush current from damaging current-intensive devices, a smooth and slow voltage transition during power On-Off can significantly reduce the pike current and protect the device from high current damage.The OVP and OCP are provided with the PSW-Multi Series. Both OVP and OCP levels can be selected, with default level set at 110%, of the rated voltage/current of the power supply. When any of the protection levels is tripped, the power output will be switched off to protect the DUT. The PSW-Multi Series provides USB Host/Device and LAN interfaces as standard, GPIB-USB adapter and RS232-USB cable as optional. The LabVIEW driver and the Data Logging PC software are supported on all the available interfaces. An analog control/monitoring connector is also available on the rear panel for external control of power On/Off and external monitoring of power output Voltage and Current.Features:- Multi-channel: 1080W for triple-channel models; output latency between channels with the same voltage module is less than 0.1ms- Multiple voltage combinations: low voltage combinations can be selected from 30V/40V/80V/160V; high voltage combinations can be selected from 250V/800V- Advanced web server: executes SCPI commands; controls through the server; data log; edit sequence- CC/CV priority mode selection is ideal for battery and LED industries- Adjustable slew rate- High efficiency and high power density power supply- Standard communications interfaces: LAN, USB, external analog remote control terminal- Optional communications interfaces: GPIB-USB adapter, RS232-USB cable- Support LabVIEW Driver

GW INSTEK - PSW-1080L444 - 80V/13.5A*3 1080W Multi-Range D.C. Power SupplyPSW-Multi Series is a dual-channel or triple-channel wide range output programmable switching DC power supply. The maximum output power can reach 1080W. There are 13 dual-channel models with a rated power of 720W, and 24 triple-channel models with a rated power dual of 1080W. The rated voltages of low voltage modules are 30V, 40V, 80V, 160V. The rated voltages of high voltage modules are 250V and 800V. The CV/CC priority selection of the PSW-Multi Series is a very useful feature for DUT protection. The conventional power supply normally operates under CV mode when the power output is turned on. This could bring a high inrush current to the capacitive load or current intensive load at the power output-on stage. Taking the I-V curve verification of LED as an example, it becomes a very challenging task to perform this measurement using a conventional power supply. With LED connected to a power supply under CV mode as the initial setting, when the power output is turned on and the voltage rises to the LED forward voltage, the current will suddenly peak up and exceed the preset value of current limit. Upon detecting this high current, the power supply starts the transition from CV mode to CC mode. Though the current becomes stable after the CC mode being activated, the current spike occurred at the CV and CC crossover point may possibly damage the DUT. At the power output-on stage, the PSW-Multi Series is able to operate under CC priority to limit the current spike occurred at the threshold voltage and therefore protects DUT from the inrush current damage.The adjustable slew rate of the PSW-Multi Series allows users to set for either output voltage or output current, a specific rise time from low to high level transition, and a specific fall time from high to low level transition. This facilitates the characteristic verification of a DUT during voltage or current level changes with controllable slew rates. Most manufacturing tests of lighting device or large capacitor during power output-on are associated with the occurrence of high surge current, which can greatly reduce the life time of the DUT. To prevent inrush current from damaging current-intensive devices, a smooth and slow voltage transition during power On-Off can significantly reduce the pike current and protect the device from high current damage.The OVP and OCP are provided with the PSW-Multi Series. Both OVP and OCP levels can be selected, with default level set at 110%, of the rated voltage/current of the power supply. When any of the protection levels is tripped, the power output will be switched off to protect the DUT. The PSW-Multi Series provides USB Host/Device and LAN interfaces as standard, GPIB-USB adapter and RS232-USB cable as optional. The LabVIEW driver and the Data Logging PC software are supported on all the available interfaces. An analog control/monitoring connector is also available on the rear panel for external control of power On/Off and external monitoring of power output Voltage and Current.Features:- Multi-channel: 1080W for triple-channel models; output latency between channels with the same voltage module is less than 0.1ms- Multiple voltage combinations: low voltage combinations can be selected from 30V/40V/80V/160V; high voltage combinations can be selected from 250V/800V- Advanced web server: executes SCPI commands; controls through the server; data log; edit sequence- CC/CV priority mode selection is ideal for battery and LED industries- Adjustable slew rate- High efficiency and high power density power supply- Standard communications interfaces: LAN, USB, external analog remote control terminal- Optional communications interfaces: GPIB-USB adapter, RS232-USB cable- Support LabVIEW Driver

GW INSTEK - PSW-1080L445 80V/13.5A*2 160V/7.2A*1 1080W Multi-Range D.C. Power SupplyPSW-Multi Series is a dual-channel or triple-channel wide range output programmable switching DC power supply. The maximum output power can reach 1080W. There are 13 dual-channel models with a rated power of 720W, and 24 triple-channel models with a rated power dual of 1080W. The rated voltages of low voltage modules are 30V, 40V, 80V, 160V. The rated voltages of high voltage modules are 250V and 800V. The CV/CC priority selection of the PSW-Multi Series is a very useful feature for DUT protection. The conventional power supply normally operates under CV mode when the power output is turned on. This could bring a high inrush current to the capacitive load or current intensive load at the power output-on stage. Taking the I-V curve verification of LED as an example, it becomes a very challenging task to perform this measurement using a conventional power supply. With LED connected to a power supply under CV mode as the initial setting, when the power output is turned on and the voltage rises to the LED forward voltage, the current will suddenly peak up and exceed the preset value of current limit. Upon detecting this high current, the power supply starts the transition from CV mode to CC mode. Though the current becomes stable after the CC mode being activated, the current spike occurred at the CV and CC crossover point may possibly damage the DUT. At the power output-on stage, the PSW-Multi Series is able to operate under CC priority to limit the current spike occurred at the threshold voltage and therefore protects DUT from the inrush current damage. The adjustable slew rate of the PSW-Multi Series allows users to set for either output voltage or output current, a specific rise time from low to high level transition, and a specific fall time from high to low level transition. This facilitates the characteristic verification of a DUT during voltage or current level changes with controllable slew rates. Most manufacturing tests of lighting device or large capacitor during power output-on are associated with the occurrence of high surge current, which can greatly reduce the life time of the DUT. To prevent inrush current from damaging current-intensive devices, a smooth and slow voltage transition during power On-Off can significantly reduce the pike current and protect the device from high current damage.The OVP and OCP are provided with the PSW-Multi Series. Both OVP and OCP levels can be selected, with default level set at 110%, of the rated voltage/current of the power supply. When any of the protection levels is tripped, the power output will be switched off to protect the DUT. The PSW-Multi Series provides USB Host/Device and LAN interfaces as standard, GPIB-USB adapter and RS232-USB cable as optional. The LabVIEW driver and the Data Logging PC software are supported on all the available interfaces. An analog control/monitoring connector is also available on the rear panel for external control of power On/Off and external monitoring of power output Voltage and Current.Features:- Multi-channel: 1080W for triple-channel models; output latency between channels with the same voltage module is less than 0.1ms- Multiple voltage combinations: low voltage combinations can be selected from 30V/40V/80V/160V; high voltage combinations can be selected from 250V/800V- Advanced web server: executes SCPI commands; controls through the server; data log; edit sequence- CC/CV priority mode selection is ideal for battery and LED industries- Adjustable slew rate- High efficiency and high power density power supply- Standard communications interfaces: LAN, USB, external analog remote control terminal- Optional communications interfaces: GPIB-USB adapter, RS232-USB cable- Support LabVIEW Driver

GW INSTEK -  PSW-1080L45580V/13.5A*1 160V/7.2A*2 1080W Multi-Range D.C. Power SupplyFeatures:Multi-channel: 1080W for triple-channel models; output latency between channels with the same voltage module is less than 0.1msMultiple voltage combinations: low voltage combinations can be selected from 30V/40V/80V/160V; high voltage combinations can be selected from 250V/800VAdvanced web server: executes SCPI commands; controls through the server; data log; edit sequenceCC/CV priority mode selection is ideal for battery and LED industriesAdjustable slew rateHigh efficiency and high power density power supplyStandard communications interfaces: LAN, USB, external analog remote control terminalOptional communications interfaces: GPIB-USB adapter, RS232-USB cableSupport LabVIEW Driver

GW INSTEK - PSW-1080L555 - 160V/7.2A*3 1080W Multi-Range D.C. Power SupplyPSW-Multi Series is a dual-channel or triple-channel wide range output programmable switching DC power supply. The maximum output power can reach 1080W. There are 13 dual-channel models with a rated power of 720W, and 24 triple-channel models with a rated power dual of 1080W. The rated voltages of low voltage modules are 30V, 40V, 80V, 160V. The rated voltages of high voltage modules are 250V and 800V. The CV/CC priority selection of the PSW-Multi Series is a very useful feature for DUT protection. The conventional power supply normally operates under CV mode when the power output is turned on. This could bring a high inrush current to the capacitive load or current intensive load at the power output-on stage. Taking the I-V curve verification of LED as an example, it becomes a very challenging task to perform this measurement using a conventional power supply. With LED connected to a power supply under CV mode as the initial setting, when the power output is turned on and the voltage rises to the LED forward voltage, the current will suddenly peak up and exceed the preset value of current limit. Upon detecting this high current, the power supply starts the transition from CV mode to CC mode. Though the current becomes stable after the CC mode being activated, the current spike occurred at the CV and CC crossover point may possibly damage the DUT. At the power output-on stage, the PSW-Multi Series is able to operate under CC priority to limit the current spike occurred at the threshold voltage and therefore protects DUT from the inrush current damage.The adjustable slew rate of the PSW-Multi Series allows users to set for either output voltage or output current, a specific rise time from low to high level transition, and a specific fall time from high to low level transition. This facilitates the characteristic verification of a DUT during voltage or current level changes with controllable slew rates. Most manufacturing tests of lighting device or large capacitor during power output-on are associated with the occurrence of high surge current, which can greatly reduce the life time of the DUT. To prevent inrush current from damaging current-intensive devices, a smooth and slow voltage transition during power On-Off can significantly reduce the pike current and protect the device from high current damage. The OVP and OCP are provided with the PSW-Multi Series. Both OVP and OCP levels can be selected, with default level set at 110%, S of the rated voltage/current of the power supply. When any of the protection levels is tripped, the power output will be switched off to protect the DUT. The PSW-Multi Series provides USB Host/Device and LAN interfaces as standard, GPIB-USB adapter and RS232-USB cable as optional. The LabVIEW driver and the Data Logging PC software are supported on all the available interfaces. An analog control/monitoring connector is also available on the rear panel for external control of power On/Off and external monitoring of power output Voltage and Current.Features:- Multi-channel: 1080W for triple-channel models; output latency between channels with the same voltage module is less than 0.1ms- Multiple voltage combinations: low voltage combinations can be selected from 30V/40V/80V/160V; high voltage combinations can be selected from 250V/800V- Advanced web server: executes SCPI commands; controls through the server; data log; edit sequence- CC/CV priority mode selection is ideal for battery and LED industries- Adjustable slew rate- High efficiency and high power density power supply- Standard communications interfaces: LAN, USB, external analog remote control terminal- Optional communications interfaces: GPIB-USB adapter, RS232-USB cable- Support LabVIEW Driver

RIGOL - PVA7250 - 2.5 GHz Bandwidth Active Probe Kit for UltraVision 2 Oscilloscopes, 8000, MSO7000, MSO5000-Series. Active Probe Kit PVA7250 2.5 GHz Bandwidth Active Probe Kit option for UltraVision 2 Oscilloscopes like the 8000, MSO7000, MSO5000 series.

RIGOL - PVA8150S - Active Single-Ended Probe, 1.5GHz, input impedance 1MOhm Active Single-Ended Probe, 1.5GHz, input impedance 1MOhm, for Rigol DHO4000, DHO/MHO5000, MSO8000/A and DS70000-Serie

RIGOL - PVP2150 - 150MHz,10:1/1:1,Passive High Impedance Probe(One Probe Kit) 150MHz,10:1/1:1,Passive High Impedance Probe(One Probe Kit)

RIGOL - PVP2350 - High Z passive Probe. Switchable.350 MHz Passive Probe with 1x:10x selector.(One Probe Kit)  High Z passive Probe. Switchable.350 MHz Passive Probe with 1x:10x selector.(One Probe Kit)

RIGOL - PVP3150 - 150 MHz Passive Probe with 1x:10x selector. Wide bandwidth of 20 MHz in 1x mode. 150 MHz Passive Probe with 1x:10x selector. Wide bandwidth of 20 MHz in 1x mode.

RIGOL - RA5040K - 40dB Attenuator 40dB Attenuator

RIGOL - RF Adaptor Kit - RF Adaptor Kit: Includes divers SMA, N-Type and BNC Adaptors. RF Adaptor Kit: Includes N(M)-SMA(F), N(M)-BNC(F), N(F)-N(F), N(M)-N(M), SMA(F)-SMA(F), SMA(M)-SMA(M) adaptors, BNC T adaptor, 50? SMA load, and 50? BNC impedance adapter.

RIGOL - RF Attenuator Kit - Additional attenuators for Rigol Spectrum Analyzers. Attenuators 6 dB, 10 dB, DC to 12.4 GHz  Additional attenuators for Rigol Spectrum Analyzers. 1x ATT12061L, 6 dB Attenuation, DC to 12.4 GHz 2x ATT12101L, 10 dB Attenuation, DC to 12.4 GHz

RIGOL - RF CATV Kit - 50 to 75 Ohm impedance transformer for Spectrum Analyzer 2x 50 Ohm N Type (m) - 75 Ohm N Type (f) 50 Ohm to 75 Ohm impedance transformer for Spectrum Analyser 2x 50 Ohm N Type (male) - 75 Ohm N Type (female)

RIGOL - RM-1-DG1000Z - 1 unit Rack Mount Kit 1 unit Rack Mount Kit

RIGOL - RM-1-DP700 - Rack Mount Kit for one unit DP700 series. Rack Mount Kit for one unit DP700 series.

RIGOL - RM-1-DP800 - Rack Mount Kit for DP2000, DP900, DP800 (single instrument) Rack Mount Kit for DP2000, DP900, DP800 (single instrument)

RIGOL - RM-1-M300 - 1 unit Rack Mount Kit 1 unit Rack Mount Kit

RIGOL - RM-2-DG1000Z - 2 units Rack Mount Kit 2 units Rack Mount Kit

RIGOL - RM-2-DP700 - Rack Mount Kit for two units DP700 series. Rack Mount Kit for two units DP700 series.