RIGOL - MSO5000-BW0T1 - Bandwidth Upgrade from 70 MHz to 100 MHz for models MSO5000 series. Bandwidth Upgrade from 70 MHz to 100 MHz for models MSO5000 series. For this upgrade the latest firmware is required.
RIGOL - MSO5000-BW0T2 - Bandwidth Upgrade from 70 MHz to 200 MHz for models MSO5000 series. Bandwidth Upgrade from 70 MHz to 200 MHz for models MSO5000 series. For this upgrade the latest firmware is required.
RIGOL - MSO5000-BW1T3 - Bandwidth Upgrade from 100 MHz to 350 MHz for models MSO5000 series. Bandwidth Upgrade from 100 MHz to 350 MHz for models MSO5000 series. For this upgrade the latest firmware is required.
RIGOL - MSO5000-BW2T3 - Bandwidth Upgrade from 200 MHz to 350 MHz for models MSO5000 series. Bandwidth Upgrade from 200 MHz to 350 MHz for models MSO5000 series. For this upgrade the latest firmware is required.
RIGOL - MSO5000-COMP - Computer Serial Triggering and Analysis(RS232/UART) Computer Serial Triggering and Analysis(RS232/UART), (Already included in MSO5000-BND. Please contact us before purchasing.)
RIGOL - MSO5000-FLEX - FlexRay serial bus trigger and analysis (FlexRay) FlexRay serial bus trigger and analysis (FlexRay), (Already included in MSO5000-BND. Please contact us before purchasing.)
RIGOL - MSO5000-PWR - Power Analysis module for the MSO5000 series devices Power Analysis module for the MSO5000 series devices, (Already included in MSO5000-BND. Please contact us before purchasing.)
RIGOL - MSO8000-JITTER - Optional Real-time eye diagram and jitter analysis module for the MSO8000 series devices. Optional Real-time eye diagram and jitter analysis module for the MSO8000 series devices. Will be delivered by E-Mail.
Keysight N1913B - Highlights
Frequency range of DC to 120 GHz (sensor dependent)
Wide dynamic range of -70 to +44 dBm (sensor dependent)
Go beyond GPIB with LAN LXI-C and USB connectivity
Backward compatible with N1913/14A EPM Series single/dual-channel average power meters
Increased measurement channels: up to three channels with two additional U2000/U8480 Series and U2050/60 (except the peak power measurement) X-Series USB power sensors connected using the optional USB hosts
Automated frequency/power sweep measurements with the optional external trigger in/out feature
BenchVue software license (BV0007B) is included, which makes it simple to connect, control instruments, and automate test sequences
KEYSIGHT - N2790AKey features:- User-selectable attenuation settings of 50:1 or 500:1- Rated to measure differential voltage up to 1,400 VDC + peak AC with high CMRR of >50 dB at 1 MHz. - Overrange indicator which alerts the user when the probe input exceeds the dynamic range of the probe- AutoProbe interface Included accessories:
- Two browser tips - Two retractable hook tips
- Two alligator clips Compatible oscilloscopes:
- Keysight InfiniiVision 3000 X-Series, 4000 X-Series
- Keysight InfiniiVision 5000, 6000 (except for 100 MHz) and 7000 Series with software V. 5.26.0001 or higher
- Keysight Infiniium S-Series
- Keysight Infiniium V-Series, Z-Series, 90000 X-Series, and 90000 Q-Series with N5449A adapter
- Keysight Infiniium 8000 and 54830 Series with software version 5.7
- Keysight 9000 Series with software version 2.0 Use the N2790A 100-MHz high-voltage differential probe to make safe and accurate floating measurements with an oscilloscope. The N2790A probe allows conventional earth-grounded Keysight oscilloscopes to be used for floating signal measurements of up to 1,400 V of differential voltage and 1,000 V of common mode voltage.Thanks to its high bandwidth and excellent input-impedance characteristics, the probe can accurately measure up to 3.5 nsec of fast transient edges in modern switching power supplies. The probe is compatible with Keysight’s AutoProbe interface with 1 Mohm input where the probe’s power is supplied by the Keysight oscilloscope’s probe interface. When probing differential signals inside of environmental chambers at extreme temperatures, Keysight offers the N7013A extreme temperature extension kit. The N7014A is compatible with the N2790A with a de-rated bandwidth of 70 MHz. The 70 cm long differential cable set and accessories can operate in temperatures ranging from -40 degrees to +85 degree Celsius.
SENSEPEEK - PCBITE-7020 - Oscilloscope probe to MMCX-Connector adaptor
A MMCX adaptor compatible with the oscilloscope probe in the SQ series (SQ100 to SQ500)
SENSEPEEK - PCBITE-7024 - PCBite kit XS insulated low profileThe PCBite kit XS insulated low profile includes four low profile PCB holders that secure your board at a height of just 20 mm, compared to the standard 50 mm. This reduced height is ideal for use in TEM cells, soldering low profile PCBs, and in mixed test setups where different PCB heights are needed.The included extra small base plate comes pre-fitted with an insulation cover and features a mirror surface on the back for added utility. Due to its compact size and light weight, rubber feet are included to provide extra friction and stability during use.INCLUDES:- 4× PCBite holder low profile- 1x XS insulated base plate- 1x Set of yellow insulation washers- 1x Set of rubber feets (6pcs)- 1x Micro fiber cloth
CHF 44.10
CHF 49.00(10% saved)
This website uses cookies to ensure the best experience possible. More information...
