KEYSIGHT E36234AThe Power Supply E36233A from Keysight with automatic range selection is the ideal selection for applications where a higher power is required. The two independent 200 W outputs of a dual channel unit can supply up to 400 W. The automatic range selection makes the Power Supply delivering the maximum current at all different voltages. Automatic serial- and parallel-circuit at 2 channel models offer max. voltage or max. current up to a power of 400 W.Key features> Dual Output: 60 V, 10 A, 400 W> Auto-series combined outputs for higher voltage up to 120 V.> Autoranging power supply that produce more current at all voltages levels> Control inrush current with the variable slew rate> Acquire device protection by using overvoltage, overcurrent, and overtemperature provide device protection> Benefit from <350 µVrms for low ripple and noise output> Improve load regulation with a four-wire sense> Measure power over time with a built-in data logger> Simplify USB, LAN (LXI Core), and optional GPIB connectivity

KEYSIGHT E36312AThe E36300 Series triple output power supply is ready for your bench application. With low output ripple/noise and accurate voltage/current measurements, you can test with confidence. Power multiple voltage buses with clean, reliable power, view voltage and current on all outputs simultaneously. You have access to advanced features such as data logging, output sequencing, list mode, and output coupling.Key features:4.3" color LCD Display Color-coded channels and display for fast and error-free control Individual voltage/current knobs with rotary encoder control for precise setting Intuitive, easy-to-use front panel interface Meter view to display more info on a selected channel Auto series/parallel connection Low output noise — ripple and noise <350 µVrms Accurate programming and readback accuracy <0.04 % Excellent stability with line and load regulation at 0.01 % All three outputs are isolated and set independently 4-wire sense to improve measurement accuracy Overvoltage, and overcurrent device protection Connectivity: USB, LAN (LXI Core), GPIB (optional)

KEYSIGHT - E36313AThe triple output E36300 series is ready for your bench application. With low output ripple/noise and accurate voltage - current measurement, you can test with confidence and power your next insight.This E36313A model offers twice the current of the other models with the same extended feature set as the E36312A model.Key Features:Clean, reliable power• Low output ripple and noise• Excellent programming/readback accuracy• Excellent line/load regulation: 0.01%• 2-wire or 4-wire remote sense• Over voltage, over current, and over temperature protectionConvenient benchtop capabilities• Three independent power supplies in one box• Low acoustic noise• Auto series/parallel connections• Front and rear output terminalIntuitive and easy to use interfaces• 4.3-inch LCD color display• Color-coded channels• Individual knobs for voltage and current• E3631A code compatible• LAN (LXI), USB and GPIB (optional)Advance characterization• Data logging• Output sequencing• LIST mode• Low current range measurement

KEYSIGHT - E36441A - E36441A, Power Supply, 4 Channels, 400 WAutoranging bench power supply - Power Your Next Insight400 W four-channel DC power supply, engineered for precision and reliability.This solution delivers 400 W across four outputs, each providing 160 W at 32 V / 10 A. Enjoy precise control with accurate programming and readback. Experience stable performance, low ripple and noise, and a fast transient response. It supports both two-wire and four-wire remote sensing for accurate voltage delivery. The user-friendly interface features a seven-inch color display, front and rear terminals, colorcoded channels, and individual adjustment knobs. Connectivity is seamless with Local Area Network (LAN) and Universal Serial Bus (USB) interfaces, and an emulator option ensures easy migration from the computer program with third-party power supplies.Features:Clean and reliable power- Four outputs – 160 W / 32 V / 10 A per channel, a total of 400 W- Auto Series to 128 V; Parallel to 40 A with the optional Series and Parallel Kit- Low output ripple and noise- Accurate programming/readback capability- Fast transient response, command processing, and up / down program speed- two-wire or four-wire remote sense- Over-voltage, over-current, and over-temperature protection Intuitive and easy-to-use interface- Seven-inch Liquid Crystal Display (LCD) color display- Numerical keypad for precise output setting- Color-coded channels- Individual knobs for voltage and current More productivity features- Built-in data logger, output sequencing, LIST mode, output tracking, and adjustable voltage slew rate- Front and rear output terminals- LAN and USB connectivity - PathWave BenchVue power supply application software

KEYSIGHT - E4980A - Precision LCR Meter, 20 Hz to 2 MHz test frequency The E4980A precision LCR meter provides the best combination of accuracy, speed, and versatility for a wide range of component measurements. Offering fast measurement speed and outstanding performance at both low and high impedance ranges, the E4980A is the ultimate tool for general R&D and manufacturing test of components and materials. LAN, USB and GPIB PC connectivity enhances your design and test productivity. For materials measurements, the E4980A with the N1500A-005/006 materials measurement suite provides ease-of-measurements, from setting-up fixtures to report generation.Key features and specifications:- 20 Hz to 2 MHz test frequency, with 4-digit resolution in any range- 0.05% basic accuracy with superior measurement repeatability at low and high impedance - Built-in 40V DC Bias (Option 001)- Rdc measurements (Option 200)Additional features include:- 20 Vrms test signal (Option 001) - High-speed measurements: 5.6 ms - 201 points list sweep - Versatile PC connectivity (LAN, USB and GPIB)

KEYSIGHT - EDU33212A - Arbitrary Waveform Generator, 20 MHz, 2 Channels The Keysight EDU33210 Series function / arbitrary waveform generators offer the standard signals and features you expect — such as modulation, sweep, and burst. It also provides features that give you the capabilities and flexibility you need to get your job done quickly, no matter how complex. An intuitive, information-packed front-panel interface enables you to easily recall where you left off when your attention is focused elsewhere. And that is just the beginning. The EDU33210 Series 20 MHz function / arbitrary waveform generators ship standard with USB and LAN connectivity, making it easy for remote access and control. It supports operation using standard commands for programmable instruments (SCPI) language, interchangeable virtual instruments (IVI) driver, web browser, or Keysight's Pathwave BenchVue software. The EDU33210 Series 20 MHz function / arbitrary waveform generators feature a built-in USB memory port enabling you to store setup parameters with a USB flash drive. This feature maximizes efficiency when you need to restore the same setup into all the function / arbitrary waveform generators in your lab. It also enables you to load the arbitrary waveform signal to the function generator quickly.Key features:- Use the signature 7-inch color display for a simultaneous parameter set up, signal viewing, and editing.- Get six built-in modulation types and 17 popular waveforms to simulate typical applications for testing.- Acquire 16-bit arbitrary waveform capability with memory up to 8 M samples per channel.- Begin using the USB and LAN IO interface for remote connectivity.- Receive Keysight's PathWave BenchVue software to enable PC control.

KEYSIGHT - EDU36311AThe Keysight EDU36311A triple-output DC bench power supply comes with a robust design and usability at an affordable price. Its 90 W, electrically isolated channels supply clean and reliable power. The signature 7-inch wide video graphics array (WVGA) gives you clear view, from instrument set up to the output status. You can easily control the EDU36311A triple output DC bench power supply remotely via USB or LAN. This solution includes Keysight’s PathWave BenchVue power supply software for the PC.Key features:Clean, reliable power• low output ripple and noise• excellent programming / readback accuracy• exceptional line / load regulation• superior over-voltage, over-current, and over-temperature protectionConvenient benchtop capabilities• independent power supplies (three) in one box• low acoustic noiseIntuitive and easy-to-use interfaces• signature 7-inch color display• distinctive color-coded channels• individual knobs for voltage and current• flexible connection using LAN (LXI) or USB

KEYSIGHT - EDUX1052AProvide a quality education for students and prepare them for industry with professional level instruments. The 1000 X-Series leverages the same technology as our higher-end oscilloscopes, allowing students to learn on the same hardware and software being used in leading R&D labs. The 1000 X-Series is a family of low-cost oscilloscopes that don’t compromise on quality. Each model has measurement and standard software analysis capability that rivals oscilloscopes 3x the price. The 1000 X-Series is a powerful protocol analyzer that enables hardware-based specialized serial communication analysis (standard). Other vendors’ oscilloscopes use software post-processing techniques that slow down the waveform and decode update rate, but the 1000 X-Series has faster decoding based on hardware technology that enhances scope usability and the probability of capturing infrequent serial communication errors. The EDUX models support I2C and UART/RS232 (standard).The 1000 X-Series has an integrated 3-digit voltmeter (DVM) inside each oscilloscope. The voltmeter operates through probes connected to the oscilloscope channels, but its measurement is decoupled from the oscilloscope triggering system so both the DVM and triggered oscilloscope measurements can be made with the same connection. You can quickly measure AC RMS, DC, and DC RMS without configuring the oscilloscope capture. The voltmeter results are always displayed, keeping these quick characterization measurements at your fingertips. The built-in DVM comes standard in 1000 X-Series oscilloscopes.Key features:- 50 MHz bandwidth- 1 GSa/s sample rate- 200k points memory- Make professional measurements, math, FFT, and serial protocol analysis, all standard- Quickly learn how to use with built-in help and training signals- See more signal detail at 100,000 waveforms/sec update rate

RIGOL - EMI-DSA800 - EMI option provides quasi peak detector and EMI filter (200 Hz, 9 kHz, 120 kHz, -6 dB bandwidth) EMI option pervides quasi peak detector and EMI filter (200 Hz, 9 kHz, 120 kHz, -6 dB bandwidth) for the DSA700 and DSA800 series.

KEYSIGHT - FG33531A - FG33531A, 1 Channel, 100 MHz Functional / Arbitrary Waveform GeneratorThe Keysight FG33530 Series function / arbitrary waveform generators offer up to 100 MHz with all the essential signals and features you expect, including modulation, sweep, and burst capabilities. Enjoy seamless navigation through the intuitive front-panel interface, allowing you to effortlessly adjust and review your settings for maximum efficiency. The Trueform technology replicates every waveform point, providing up to 16 Mega Samples (MSa) record length per channel. Enhance your waveform creation process with Keysight BenchVue software and BenchLink Waveform Builder Pro software, making it simple to create and edit even your most complex waveforms.Features:- Seven-inch color display for parameter setup, signal viewing, and editing- Jitter of less than 50 ps- Total harmonic distortion of less than 0.06%- Six built-in modulation types and seventeen popular waveforms to simulate typical applications for testing- 16-bit arbitrary waveform capability with maximum sampling rate of 320 MSa/s and memory of up to 16 MSa per channel.

KEYSIGHT - FG33532A - FG33532A, 2 Channel, 100 MHz Functional / Arbitrary Waveform GeneratorThe Keysight FG33530 Series function / arbitrary waveform generators offer up to 100 MHz with all the essential signals and features you expect, including modulation, sweep, and burst capabilities. Enjoy seamless navigation through the intuitive front-panel interface, allowing you to effortlessly adjust and review your settings for maximum efficiency. The Trueform technology replicates every waveform point, providing up to 16 Mega Samples (MSa) record length per channel. Enhance your waveform creation process with Keysight BenchVue software and BenchLink Waveform Builder Pro software, making it simple to create and edit even your most complex waveforms.Features:- Seven-inch color display for parameter setup, signal viewing, and editing- Jitter of less than 50 ps- Total harmonic distortion of less than 0.06%- Six built-in modulation types and seventeen popular waveforms to simulate typical applications for testing- 16-bit arbitrary waveform capability with maximum sampling rate of 320 MSa/s and memory of up to 16 MSa per channel.

RIGOL - FH-DG5000 - Frequency Hopping Option Frequency Hopping Option

RIGOL - FREQ-DL3 - High Frequency Option for DL3000 Series Loads. High Frequency Option for DL3000 Series Loads.

GW INSTEK - GAG-810 - Low Sine Wave Distortion Generator 10 Hz - 1 MHzThe GAG-810 provide a convenient solution for low frequency (< 1MHz) signal generation, specifically for audio bandwidth. Intuitive and simple panel interface provides quick frequency and amplitude adjustment, with dial/key shortcuts to different ranges. Square wave generation covers digital application in addition to the traditional analog using sine waves. Distortion is kept at minimum level, especially at the audible frequency range: 0.02% or less distortion factor for 500Hz~20kHz. The external synchronization signal input helps collaborate with other measurement devices.Key features:- Frequency from 10Hz ~ 1MHz- 0.02% Low Sine Wave Distortion- 6 Steps Output Attenuator- EXT SYNC Function

GWINSTEK - GBM-01Features- 4 Wire (kelvin clip) test lead, 90V (max.), approx. 1100mm - Applicable Device: GBM-3000

GW INSTEK - GCT-9040 - AC Ground Bond Tester GW Instek GCT-9040 provides the maximum AC test current of 40A and adopts the PWM design the same as other models to ensure test efficiency and reliability. In addition to the standalone ground bond test operation, GCT-9040, with 40A AC ground bond test capability, can also externally connect with GW Instek safety testers such as GPT-9800 / 9900 / 9900A series to augment users’ product test requirements by the all-in-one test platform. Additionally, after the safety tester system has been assembled, not only the sequential test function for the original all-in-one models can be executed, but also the simultaneous output test can be conducted. The simultaneous output test allows two testers to simultaneously test DUT so as to shorten the overall test time. Whether the safety tester system executes sequential test or simultaneous output test, GCT-9040 will automatically obtain control over two testers, including activation control, final status indication light, and pin signal output from Digital I/O etc. to avoid confusion caused by each tester’s indication light. GCT-9040, with respect to remote control and data retrieval, not only provides standard USB (optional GPIB) interface to control all functionalities but also controls connected safety testers (GPT-9800 / 9900 / 9900A series) via commands to read measurement results.Key features:- AC 40A Ground Bond Tester- Measuring Resistance from 1mΩ~650mΩ- Connect with the GPT-9800/9900 series to become a multifunctional test or simultaneous test system- 240x64 Ice Blue Dot Matrix LCD- Function Key for quick selecting- High intensity flash for Caution & Status indication- PWM switching amplifier to enhance the power efficiency and reliable testing- Max. 100 memory block for test condition setting.- Remote terminal on the front panel for “start” and “stop” remote active- Interface: USB device, Signal I/O and GPIB (optional)

GW INSTEK - GDM-531 - 6000 Counts Hand-Held DMM The GDM-500 Series Hand Held DMM are a compact, high precision, battery operated multimeter series designed to meet of service engineers. The GDM-500 Series design is driven by mobile-oriented features: automatic power off to preserve battery life, a large backlight display for crisp viewing, a rotary selector and push buttons to ease operation, and then NCV (Non-Contact Voltage) function for outdoor use.The basic functions match the depth of bench-top multimeters: fuse-protected current input, true RMS for accurate AC measurements, Audible/Visual Alarm when Overload, Auto ranging, Duty cycle and Relative mode. The compact, reliable and economical devices are ideal for any engineer.Key features:- 6000 Counts Manual Ranging- Display Backlight/Auto Power Off- Capacitance Measurement- Non-Contact Voltage (NCV) Detection- Data Hold- Audible/Visual Alarm when Overload- Safety Rating: CAT III 600VIncluded:- User manual- Test leads- Battery

GW INSTEK - GDM-532 - 9999 Counts Hand-Held DMM with True RMS Measurement The GDM-500 Series Hand Held DMM are a compact, high precision, battery operated multimeter series designed to meet of service engineers. The GDM-500 Series design is driven by mobile-oriented features: automatic power off to preserve battery life, a large backlight display for crisp viewing, a rotary selector and push buttons to ease operation, and then NCV (Non-Contact Voltage) function for outdoor use.The basic functions match the depth of bench-top multimeters: fuse-protected current input, true RMS for accurate AC measurements, Audible/Visual Alarm when Overload, Auto ranging, Duty cycle and Relative mode. The compact, reliable and economical devices are ideal for any engineer.Key features:- 9999 Counts Auto/Manual Ranging - Display Backlight/Auto Power Off- Continuity Beeper/Diode Test- Temperature Measurement- Duty Cycle (%) Measurement- Non-Contact Voltage (NCV) Detection- Data Hold and Relative Mode- Safety Rating: CAT II 1000V, CAT III 600VIncluded:- User manual- Test leads- Battery- K-type thermocouple

GW INSTEK - GDM-533 - 6000 Counts Hand-Held DMM with True RMS Measurement and USB Interface The GDM-500 Series Hand Held DMM are a compact, high precision, battery operated multimeter series designed to meet of service engineers. The GDM-500 Series design is driven by mobile-oriented features: automatic power off to preserve battery life, a large backlight display for crisp viewing, a rotary selector and push buttons to ease operation, and then NCV (Non-Contact Voltage) function for outdoor use.The basic functions match the depth of bench-top multimeters: fuse-protected current input, true RMS for accurate AC measurements, Audible/Visual Alarm when Overload, Auto ranging, Duty cycle and Relative mode. The compact, reliable and economical devices are ideal for any engineer.Key features:- 6000 Counts Auto/Manual Ranging- 31 Segments Analogue Bar- LoZ ACV Measurement- ACV Measurement up to 1000V- Non-Contact Voltage (NCV) Detection- Current Measurement up to 20A- Temperature and Duty Cycle (%) Measurement- Audible/Visual Alarm when Overload- True RMS/USB Interface- Safety Rating: CAT III 1000V, CAT IV 600VIncluded:- User manual- Test leads- Battery- USB cable & Adapter socket- K-type thermocouple

GW INSTEK - GDM-541 - 22000 Counts Hand-Held DMM with True RMS Measurement and USB Interface The GDM-500 Series Hand Held DMM are a compact, high precision, battery operated multimeter series designed to meet of service engineers. The GDM-500 Series design is driven by mobile-oriented features: automatic power off to preserve battery life, a large backlight display for crisp viewing, a rotary selector and push buttons to ease operation, and then NCV (Non-Contact Voltage) function for outdoor use. The basic functions match the depth of bench-top multimeters: fuse-protected current input, true RMS for accurate AC measurements, Audible/Visual Alarm when Overload, Auto ranging, Duty cycle and Relative mode. The compact, reliable and economical devices are ideal for any engineer.Key features:- 22000 Counts Auto/Manual Ranging- 46 Segments Analogue Bar- ACV Measurement up to 1000V- AC+DC Voltage Measurement- Non-Contact Voltage (NCV) Detection- Current Measurement up to 20A- Duty Cycle (%) Measurement- Transistor (hFE) Measurement- Audible/Visual Alarm when Overload- True RMS/USB Interface - Safety Rating: CAT III 1000V, CAT IV 600V Included:- User manual- Test leads- Battery- USB cable & Adapter socket

GW INSTEK - GDM-8341 - Digit Dual Measurement Multimeter 50'000 Counts GW INSTEK rolls out the new generation Dual Measurement Multimeter - the GDM-834x series, which has two models -GDM-8341 and GDM 8342. Its exceptional features include 50,000 counts, VFD dual-display, 0.02% basic DC voltage accuracy and a USB protocol connector to provide users with measurement precision, lucid data observation, and the convenience to connect with the personal computer.The GDM-834x series not only supports the fundamental measurement items provided by general multimeters, but also equips with capacitance and temperature measurement functions. Furthermore, the GDM-834x series also provides many auxiliary functions to meet the measurement requirements for manufacturing process tests, educational experiments and testing facilities.With respect to storing and retrieving data, the GDM-834x series has two methods to offer: first, the USB flash drive storage function - operating alone without connecting with a computer; second, USB interface (virtual COM port) and optional GPIB interface (must be installed in factory) for automatic measurement system users to conveniently save and retrieve data.- Convenient USB flash drive storage function- Selectable measurement speeds- Various measurement items and functionalities- Dual measurement/dual display- Command compatibility & Free software-remote control and data retrievingFeatures:- 50,000 counts, VFD display- Dual measurement/Dual display- Selectable measurement speeds, the maximum: 40 Readings/s for DCV- The basic precision of DC voltage: 0.02%- Auto/manual Ranging- True RMS (AC，AC+DC) measurements- 11 different measurement functions - Max./Min., REL, MX+B, 1/X, Ref%, Compare, Hold, dB, dBm- Standard USB device interface to connect with a computer - Temperature measurement function (GDM-8342 only) - USB storage for Data collection (GDM-8342 only)

GW INSTEK - GDM-8351 - Digit Dual Measurement Multimeter 5.5 Digits / 120'000 Counts GW Instek presents the brand new 5½ Digit Dual Measurement Multimeter ─ GDM-8351 to replace GDM-8251A of the same category. GDM-8351 features VFD dual-display, maximum 120,000 counts, 0.012% basic DC voltage accuracy and USB/RS232C connectors to provide users with measurement precision, lucid data observation, and the convenient connection with the personal computer.In addition to the fundamental measurement items such as AC/DC voltage, AC/DC current, AC+DC voltage/current, 2W/4W resistance, frequency, temperature measurement, continuity beeper and diode test, GDM-8351 also equips with the capacitance measurement function. Furthermore, the GDM-8351 also provides many auxiliary functions, including maximum/minimum values, dB, dBm, compare, reading hold, algorithms (MX+B, 1/X, %) etc. to meet the measurement requirements for manufacturing process tests, educational experiments and testing facilities.For the external control, the pin of digital I/O interface not only provides the signal output frequently used by the compare function, but also allows users to define signal output for each pin. Under the self-definition mode, users can apply the I/O as a simple digital hardware. The external control requirement can be achieved by signals from each pin so as to help users reduce trouble of making hardware.With respect to remote control and retrieving data, GDM-8351, taking consideration of users’ habitual practice and universal system interface, provides standard RS-232C and USB interface to edit control programs and read measurement results. It is worth noting that for utilizing the USB interface, users have options of selecting either USBCDC or USBTMC mode. While USBTMC is selected, users are able to control instrument with the USB interface exactly the same as controlling instrument with the GPIB interface; therefore, the relatively expensive GPIB connection cable is no longer required.Key features:- Dual measurement / Dual display- Selectable measurement speeds- Various measurement items and functionalities- Convenient Digital I/O function- Free software-remote control and data retrieving- Command compatibility

GW INSTEK - GDM-9061 - 6.5 DIGIT DUAL MEASUREMENT DMMGW Instek launches GDM-9061 — 6½ digit dual measurement multimeter, featuring high precision DC voltage accuracy, fast sampling rate, 12 measurement functions (DC voltage/current, AC voltage/current, 2-wire/4-wire resistance, frequency, period, diode, continuity beeper, temperature, capacitance), 6 mathematical functions (dB/dBm/Compare/ MX+B/Percent and 1/X) as well as a variety of communications interfaces (USB device/host, RS-232C, LAN, digital I/O) to provide comprehensive measurement capabilities, higher speed and accuracy.Key features:- 6 1/2 Digit Display: 1,200,000 Counts- 4.3 TFT Graphic LCD- DCV Basic Accuracy: 0.0035 %- 12 Measurement Functions: DCV, ACV, DCI, ACI, 2-wire and 4-wire Resistance, Frequency, Period, Diode, Continuity, Temperature and Capacitance- Sampling Rate up to 10k SPS- Dual Measurement Function to Providing Two Selected Measurement Simultaneously- Offer Graphical Capabilities lncluding Histogram, Bar Meter and Trend- Temperature Measurement Support RTD, Thermistor as Well as Thermocouple- Standard Interfaces: USB Host/Device, RS-232C, LAN, Digital I/O

GW INSTEK - GDP-025 - 25MHz High Voltage Differential Probe.25MHz High Voltage Differential Probe. For use with following GW Instek oscilloscopes: GDS-3000 Series, MSO-2000E Series, MDO-2000E Series, GDS-2000A/E Series, GDS-1000B Series. GDP-025 Probe provides 25 MHz bandwidth, enabling users to safely make high-voltage measurements on floating circuit test. It converts floating signals to low-voltage ground-referenced signals that can be displayed safely on any ground-referenced oscilloscope. GDP-025 Differential Probe offers user-selectable attenuation settings that make it highly versatile, allowing it to be used for a broad range of applications. The probe comes with probe tip accessories for use with both small or large components in tight places. GDP-025 also provides over-range indicator which alerts the user when the probe input exceeds the dynamic range of the probe.Features include:- 25 MHz Bandwidth- Up to 1400 V differential voltage- Flexible attenuation option, suitable for various applications- Separation design, users can easily replace the probe connector to complete variety of test applications.