GW INSTEK - GTL-232 - RS-232C Cable, 9-pin, F-F Type, null modem, 2000mmFor use with following instruments by GW Instek:- Oscilloscopes - GDS-3000 Series, GDS-2000A Series - Functional Generators - AFG-3081/3051, GFG-3015- LCR meters - LCR -6000 series

KEYSIGHT - HD302MSOOscilloscope, 2 Channels, 200 MHz, 14Bit, 20Mpts/Channel.The HD3 Series brings Keysight’s industry-leading capabilities from high-performance oscilloscopes to the high-volume level, making precision portable from 200 MHz to 1 GHz. Leveraging custom hardware technology from the UXR Series, the HD3 boasts impressive resolution with four times the vertical accuracy with a 14-bit ADC and half the noise floor. Paired with our fast, uncompromised waveform update rate and twenty-five times more memory, the HD3 Series can capture small signals with high vertical resolution.See What You’ve Been Missing with Portable PrecisionMeet the new generation of Keysight InfiniiVision oscilloscopes, the HD3 Series. The HD3 was created with high-performance technology leveraged from our high-speed UXR Series oscilloscopes, now making precision available in a much more portable form factor. With the all-new architecture of the HD3 (including a custom 14-bit ADC and low noise front end), you can analyze all signals in your design with high vertical accuracy. This ensures you make the most accurate measurements possible and have the most realistic view into the signals inside your device. You can achieve even greater accuracy (5x better) with up to 16 bits of resolution using the built-in per channel bandwidth filters. Need to use the full bandwidth to 1 GHz? You will still get extremely high accuracy at the full bandwidth, with the ability to zoom to 500 uV/div.See What You’ve Been Missing with Custom TechnologyThe HD3 Series uses custom components optimized specifically for oscilloscope measurements. Keysight’s R&D team designed a brand-new 14-bit ADC, an all-new ASIC, other support components, and an entirely new architecture for the signal to flow through. Because Keysight designs these components rather than using off-the-shelf components, our hardware works much faster and more efficiently since it is designed specifically for oscilloscopes. Part of this new architecture also includes deep memory with dedicated memory chips for every channel (100 Mpts). This means there is no interleaving between channels. You can have all four channels turned on and still get the maximum memory and sample rate on every channel. Our new custom ASIC (MegaZoom 5) enables the HD3 to have hardware-based functions such as zone trigger, serial decoding, and mask testing. Custom hardware also makes it possible for us to create new custom software, such as the Fault Hunter software application. Simply run Fault Hunter and detect any glitches or errors on your signal.See What You’ve Been Missing with Versatile FunctionalityDive deeper than ever before with more flexibility in the InfiniiVision user interface. Not only did we leverage the hardware from our high-performance oscilloscopes, but we also took some of the more advanced user interface capabilities and added them to the new InfiniiVision user interface. With more menus and user customization, you can set up the scope to be customized to your exact testing requirements. The custom grid display, favorites bar, and automatic actions make it even easier to dive deep into your characterization and view results quickly. All models can be upgraded in bandwidth or memory using immediate license upgrades. There are no returns to factory required for any upgrades. All models are also already equipped with these standard functions that typically cost thousands of dollars:• Frequency response analysis• Fault Hunter• Zone trigger• Segmented memory• MSO• Mask testing• Histograms• FFT, and more

KEYSIGHT - HD304MSO- Oscilloscope, 4 Channels, 200 MHz, 14Bit, 20Mpts/Ch.The HD3 Series brings Keysight’s industry-leading capabilities from high-performance oscilloscopes to the high-volume level, making precision portable from 200 MHz to 1 GHz. Leveraging custom hardware technology from the UXR Series, the HD3 boasts impressive resolution with four times the vertical accuracy with a 14-bit ADC and half the noise floor. Paired with our fast, uncompromised waveform update rate and twenty-five times more memory, the HD3 Series can capture small signals with high vertical resolution.See What You’ve Been Missing with Portable Precision Meet the new generation of Keysight InfiniiVision oscilloscopes, the HD3 Series. The HD3 was created with high-performance technology leveraged from our high-speed UXR Series oscilloscopes, now making precision available in a much more portable form factor. With the all-new architecture of the HD3 (including a custom 14-bit ADC and low noise front end), you can analyze all signals in your design with high vertical accuracy. This ensures you make the most accurate measurements possible and have the most realistic view into the signals inside your device. You can achieve even greater accuracy (5x better) with up to 16 bits of resolution using the built-in perchannel bandwidth filters. Need to use the full bandwidth to 1 GHz? You will still get extremely high accuracy at the full bandwidth, with the ability to zoom to 500 uV/div. See What You’ve Been Missing with Custom Technology The HD3 Series uses custom components optimized specifically for oscilloscope measurements. Keysight’s R&D team designed a brand-new 14-bit ADC, an all-new ASIC, other support components, and an entirely new architecture for the signal to flow through. Because Keysight designs these components rather than using off-the-shelf components, our hardware works much faster and more efficiently since it is designed specifically for oscilloscopes. Part of this new architecture also includes deep memory with dedicated memory chips for every channel (100 Mpts). This means there is no interleaving between channels. You can have all four channels turned on and still get the maximum memory and sample rate on every channel. Our new custom ASIC (MegaZoom 5) enables the HD3 to have hardware-based functions such as zone trigger, serial decoding, and mask testing. Custom hardware also makes it possible for us to create new custom software, such as the Fault Hunter software application. Simply run Fault Hunter and detect any glitches or errors on your signal. See What You’ve Been Missing with Versatile Functionality Dive deeper than ever before with more flexibility in the InfiniiVision user interface. Not only did we leverage the hardware from our high-performance oscilloscopes, but we also took some of the more advanced user interface capabilities and added them to the new InfiniiVision user interface. With more menus and user customization, you can set up the scope to be customized to your exact testing requirements. The custom grid display, favorites bar, and automatic actions make it even easier to dive deep into your characterization and view results quickly. All models can be upgraded in bandwidth or memory using immediate license upgrades. There are no returns to factory required for any upgrades. All models are also already equipped with these standard functions that typically cost thousands of dollars: • Frequency response analysis • Fault Hunter • Zone trigger • Segmented memory • MSO • Mask testing • Histograms • FFT, and more

RIGOL - HIRES-DL3 - High Measurement Resolution Option for DL3000 Series Loads. High Measurement Resolution Option for DL3000 Series Loads.

RIGOL - HIRES-DP700 - Optional 1 mV / 1 mA high resolution module for the DP700 device. Optional 1 mV / 1 mA high resolution module for the DP700 device.

RIGOL - HIRES-DP800 - Optional 1 mV / 1 mA high resolution module for the DP800 device series Optional 1 mV / 1 mA high resolution module for the DP800 device series

RIGOL - INTERFACE-DP800 - Optional RS-232 and LAN interface module for the DP800 device series Optional RS-232 and LAN interface module for the DP800 device series

ITECH - IT-E121 -IT-E121 Communication InterfaceRS-232 Communication interface with RS232 standard communication cable.Models of application: IT6100, IT6800, IT6322, IT6302, IT8500, IT8500+

ITECH - IT-E151A  - 19" rack mount kit for 1 * 2U and 2 * 2U side by side Most ITECH loads (Series IT8900/IT8500 (power below 1800W)/IT8811/IT8812) and power supplies (Series IT6800, IT6900, IT6322, IT6120, IT6150, IT6400, IT6700H (except IT6726)) are compatible with a standard 19-inch cabinet.

ITECH - IT6151 - IT6151 Programmable Linear DC Power Supply 5.2V / 60A / 312W IT6100 series power supply is designed to meet the test requirements that general supplies can not achieve. High-speed and high-precision features make production line capacity greatly improved, different from the conventional high speed power supply, IT6100 ensures low ripple and noise while meeting the high speed requirements.Key features:• Linear programmable power supply• High-light VFD display• Lower ripple and lower noise• Built-in 5 1/2 digital voltmeter• Support SCPI communication protocol• Optional GPIB/USB/RS232 interfaces• High accuracy and high resolution• PC monitoring software • List mode operation, change output voltage and current quickly• Suitable for 19" standard rack installation Consult the datasheet for a complete list of functions and features.

ITECH - IT6152 - IT6153 Programmable Linear DC Power Supply 30V / 18A / 540WThe IT6100 series guarantees accurate measurements with 0.1 mV / 0.1 mA high resolution and high accuracy. With high-speed List mode it generates voltage waveforms to meet high-speed testing needs. The IT6100 series has a built-in 5½ digital voltmeter and milliohm meter, which can measure additional signals. The IT6100 series supports SCPI communication protocol, GPIB / USB / RS232 interfaces are optional and can be added with external adapters.Key features:- Linear programmable power supply- High-brightness VFD display- Low ripple and low noise- Built-in 5½ digital voltmeter- Supports SCPI communication protocol- Optional GPIB / USB / RS232 interfaces- High accuracy and high resolution- PC monitoring software- List mode operation, fast output voltage and current adjustment- Suitable for 19" standard rack installationConsult the datasheet for a complete list of functions and features.

ITECH - IT6153 - IT6153 Programmable Linear DC Power Supply 30V / 18A / 540WIT6100 series power supply is designed to meet the test requirements that general supplies can not achieve. High-speed and high-precision features make production line capacity greatly improved, different from the conventional high speed power supply, IT6100 ensures low ripple and noise while meeting the high speed requirements.Key features: - Linear programmable power supply- High-light VFD display- Lower ripple and lower noise- Built-in 5 1/2 digital voltmeter- Support SCPI communication protocol- Optional GPIB/USB/RS232 interfaces- High accuracy and high resolution- PC monitoring software- List mode operation, change output voltage and current quickly- Suitable for 19" standard rack installationConsult the datasheet for a complete list of functions and features.

ITECH - IT6154 - IT6154 Programmable Linear DC Power Supply 60V / 9A / 540WIT6100 series power supply is designed to meet the test requirements that general supplies can not achieve. High-speed and high-precision features make production line capacity greatly improved, different from the conventional high speed power supply, IT6100 ensures low ripple and noise while meeting the high speed requirements.Key features:- Linear programmable power supply- High-light VFD display- Lower ripple and lower noise- Built-in 5 1/2 digital voltmeter- Support SCPI communication protocol- Optional GPIB/USB/RS232 interfaces- High accuracy and high resolution- PC monitoring software- List mode operation, change output voltage and current quickly- Suitable for 19" standard rack installationConsult the datasheet for a complete list of functions and features.

ITECH - IT8701 - IT8701 Main Frame with GPIB, USB, RS232, Ethernet, 2 slotsThis Main Frame can accomodate up to 2 IT87xx E-Load ModulesIT8700 series programmable DC electronic load adopts removable modules design, with single frame control 8 channels, and 16 channels with extended mainframe extension transient mode up to 25 kHz , which improves your test efficiency, with high resolution and accuracy. Users can freely choose in the 8 load modules according to the number of channels and power requirements, controlled by mainframe control panel, or controlled by IT9000-PV8700 software via built-in LAN / RS232 / USB interface. IT8700, with adjustable slope, list function, automatic test and other functions, automatic test function can be set to work under CC / CV / CR / CP can be used in the application of R&D and production line. IT8700 has self-diagnosis and comprehensive OVP, OCP, OPP, OTP, etc., ensure the operator safety.Key features:- Removable modules for easy system configurability- Dual-channel module can display each channel information simultaneously- Single frame up to max.8 channels, extended frame up to max.16 channels- Dynamic power distribution function for dual channels- Measurement resolution: 0.1mV/0.01mA- Measure short-circuit peak current value and peak voltage value- Measurement speed for voltage, current up to 50kHz- Adjustable current rising / falling slope- Auto-test function, with automatic judgement whether the test result exceeds the set specification- Simulate various waveforms with load under List mode- Up to 25kHz dynamic mode- Automatic test function can automatically determine whether the test results exceed the set specifications- Simultaneously perform multiple sets of electronic load modules- OVP / OCP / OPP / OTP / anti-reverse protection function- Built-in Ether Net / USB / RS232 communication interface • Support anti-reverse alarm function

ITECH - IT8722 - IT8722 DC E-load 2 channels: 2 x 80V / 20A / 250W (Total 300W max.) This E-Load module fits into one slot of a IT8701 or IT8702 Modular E-Load Main Frame. It cannot be used without a Main Frame.IT8700 series programmable DC electronic load adopts removable modules design, with single frame control 8 channels, and 16 channels with extended mainframe extension transient mode up to 25 kHz , which improves your test efficiency, with high resolution and accuracy. Users can freely choose in the 8 load modules according to the number of channels and power requirements, controlled by mainframe control panel, or controlled by IT9000-PV8700 software via built-in LAN / RS232 / USB interface. IT8700, with adjustable slope, list function, automatic test and other functions, automatic test function can be set to work under CC / CV / CR / CP can be used in the application of R&D and production line. IT8700 has self-diagnosis and comprehensive OVP, OCP, OPP, OTP, etc., ensure the operator safety. Key features:- Removable modules for easy system configurability- Dual-channel module can display each channel information simultaneously- Single frame up to max.8 channels, extended frame up to max.16 channels- Dynamic power distribution function for dual channels- Measurement resolution: 0.1mV/0.01mA- Measure short-circuit peak current value and peak voltage value- Measurement speed for voltage, current up to 50kHz - Adjustable current rising / falling slope- Auto-test function, with automatic judgement whether the test result exceeds the set specification- Simulate various waveforms with load under List mode- Up to 25kHz dynamic mode- Automatic test function can automatically determine whether the test results exceed the set specifications- Simultaneously perform multiple sets of electronic load modules- OVP / OCP / OPP / OTP / anti-reverse protection function- Built-in Ether Net / USB / RS232 communication interface- Support anti-reverse alarm function

ITECH - IT8722B - IT8722B DC E-load 2 channels: 2 x 500V / 15A / 150W (Total 300W max.)This E-Load module fits into one slot of a IT8701 or IT8702 Modular E-Load Main Frame.It cannot be used without a Main Frame.IT8700 series programmable DC electronic load adopts removable modules design, with single frame control 8 channels, and 16 channels with extended mainframe extension transient mode up to 25 kHz , which improves your test efficiency, with high resolution and accuracy. Users can freely choose in the 8 load modules according to the number of channels and power requirements, controlled by mainframe control panel, or controlled by IT9000-PV8700 software via built-in LAN / RS232 / USB interface. IT8700, with adjustable slope, list function, automatic test and other functions, automatic test function can be set to work under CC / CV / CR / CP can be used in the application of R&D and production line. IT8700 has self-diagnosis and comprehensive OVP, OCP, OPP, OTP, etc., ensure the operator safety.Key features:- Removable modules for easy system configurability- Dual-channel module can display each channel information simultaneously- Single frame up to max. 8 channels, extended frame up to max.16 channels- Dynamic power distribution function for dual channels- Measurement resolution: 0.1mV/0.01mA- Measure short-circuit peak current value and peak voltage value- Measurement speed for voltage, current up to 50kHz- Adjustable current rising / falling slope- Auto-test function, with automatic judgement whether the test result exceeds the set specification- Simulate various waveforms with load under List mode- Up to 25kHz dynamic mode- Automatic test function can automatically determine whether the test results exceed the set specifications- Simultaneously perform multiple sets of electronic load modules- OVP / OCP / OPP / OTP / anti-reverse protection function- Built-in Ether Net / USB / RS232 communication interface- Support anti-reverse alarm function

ITECH - IT8723 - IT8723 DC E-load 2 channels: 2 x 80V / 45A / 300W (Total 600W max.)This E-Load module fits into one slot of a IT8701 or IT8702 Modular E-Load Main Frame.It cannot be used without a Main Frame.IT8700 series programmable DC electronic load adopts removable modules design, with single frame control 8 channels, and 16 channels with extended mainframe extension transient mode up to 25 kHz , which improves your test efficiency, with high resolution and accuracy. Users can freely choose in the 8 load modules according to the number of channels and power requirements, controlled by mainframe control panel, or controlled by IT9000-PV8700 software via built-in LAN / RS232 / USB interface. IT8700, with adjustable slope, list function, automatic test and other functions, automatic test function can be set to work under CC / CV / CR / CP can be used in the application of R&D and production line. IT8700 has self-diagnosis and comprehensive OVP, OCP, OPP, OTP, etc., ensure the operator safety.Key features:- Removable modules for easy system configurability- Dual-channel module can display each channel information simultaneously- Single frame up to max.8 channels, extended frame up to max.16 channels- Dynamic power distribution function for dual channels- Measurement resolution: 0.1mV/0.01mA- Measure short-circuit peak current value and peak voltage value- Measurement speed for voltage, current up to 50kHz- Adjustable current rising / falling slope- Auto-test function, with automatic judgement whether the test result exceeds the set specification- Simulate various waveforms with load under List mode- Up to 25kHz dynamic mode- Automatic test function can automatically determine whether the test results exceed the set specifications- Simultaneously perform multiple sets of electronic load modules- OVP / OCP / OPP / OTP / anti-reverse protection function- Built-in Ether Net / USB / RS232 communication Interface

ITECH - IT8732- IIT8732 DC E-load 1 channel: 80V / 60A / 400WThis E-Load module fits into one slot of a IT8701 or IT8702 Modular E-Load Main Frame. It cannot be used without a Main Frame IT8700 series programmable DC electronic load adopts removable modules design, with single frame control 8 channels, and 16 channels with extended mainframe extension transient mode up to 25 kHz , which improves your test efficiency, with high resolution and accuracy. Users can freely choose in the 8 load modules according to the number of channels and power requirements, controlled by mainframe control panel, or controlled by IT9000-PV8700 software via built-in LAN / RS232 / USB interface. IT8700, with adjustable slope, list function, automatic test and other functions, automatic test function can be set to work under CC / CV / CR / CP can be used in the application of R&D and production line. IT8700 has self-diagnosis and comprehensive OVP, OCP, OPP, OTP, etc., ensure the operator safety.Key features:- Removable modules for easy system configurability- Dual-channel module can display each channel information simultaneously- Single frame up to max.8 channels, extended frame up to max.16 channels- Dynamic power distribution function for dual channels- Measurement resolution: 0.1mV/0.01mA- Measure short-circuit peak current value and peak voltage value- Measurement speed for voltage, current up to 50kHz- Adjustable current rising / falling slope- Auto-test function, with automatic judgement whether the test result exceeds the set specification- Simulate various waveforms with load under List mode- Up to 25kHz dynamic mode- Automatic test function can automatically determine whether the test results exceed the set specifications- Simultaneously perform multiple sets of electronic load modules- OVP / OCP / OPP / OTP / anti-reverse protection function- Built-in Ether Net / USB / RS232 communication interface- Support anti-reverse alarm function

ITECH - IT8733 - IT8733 DC E-load 1 channel: 80V / 120A / 600WThis E-Load module fits into one slot of a IT8701 or IT8702 Modular E-Load Main Frame. It cannot be used without a Main FrameIT8700 series programmable DC electronic load adopts removable modules design, with single frame control 8 channels, and 16 channels with extended mainframe extension transient mode up to 25 kHz , which improves your test efficiency, with high resolution and accuracy. Users can freely choose in the 8 load modules according to the number of channels and power requirements, controlled by mainframe control panel, or controlled by IT9000-PV8700 software via built-in LAN / RS232 / USB interface. IT8700, with adjustable slope, list function, automatic test and other functions, automatic test function can be set to work under CC / CV / CR / CP can be used in the application of R&D and production line. IT8700 has self-diagnosis and comprehensive OVP, OCP, OPP, OTP, etc., ensure the operator safety.Key features:- Removable modules for easy system configurability- Dual-channel module can display each channel information simultaneously- Single frame up to max.8 channels, extended frame up to max.16 channels- Dynamic power distribution function for dual channels- Measurement resolution: 0.1mV/0.01mA- Measure short-circuit peak current value and peak voltage value- Measurement speed for voltage, current up to 50kHz- Adjustable current rising / falling slope- Auto-test function, with automatic judgement whether the test result exceeds the set specification- Simulate various waveforms with load under List mode- Up to 25kHz dynamic mode- Automatic test function can automatically determine whether the test results exceed the set specifications- Simultaneously perform multiple sets of electronic load modules- OVP / OCP / OPP / OTP / anti-reverse protection function- Built-in Ether Net / USB / RS232 communication interface- Support anti-reverse alarm function

ITECH - IT8733B - IT8733B DC E-load 1 channel: 500V / 30A / 500WThis E-Load module fits into one slot of a IT8701 or IT8702 Modular E-Load Main Frame.It cannot be used without a Main FrameIT8700 series programmable DC electronic load adopts removable modules design, with single frame control 8 channels, and 16 channels with extended mainframe extension transient mode up to 25 kHz , which improves your test efficiency, with high resolution and accuracy. Users can freely choose in the 8 load modules according to the number of channels and power requirements, controlled by mainframe control panel, or controlled by IT9000-PV8700 software via built-in LAN / RS232 / USB interface. IT8700, with adjustable slope, list function, automatic test and other functions, automatic test function can be set to work under CC / CV / CR / CP can be used in the application of R&D and production line. IT8700 has self-diagnosis and comprehensive OVP, OCP, OPP, OTP, etc., ensure the operator safety.Key features:- Removable modules for easy system configurability- Dual-channel module can display each channel information simultaneously- Single frame up to max.8 channels, extended frame up to max. 16 channels- Dynamic power distribution function for dual channels- Measurement resolution: 0.1mV/0.01mA- Measure short-circuit peak current value and peak voltage value- Measurement speed for voltage, current up to 50kHz- Adjustable current rising / falling slope- Auto-test function, with automatic judgement whether the test result exceeds the set specification- Simulate various waveforms with load under List mode- Up to 25kHz dynamic mode- Automatic test function can automatically determine whether the test results exceed the set specifications- Simultaneously perform multiple sets of electronic load modules- OVP / OCP / OPP / OTP / anti-reverse protection function- Built-in Ether Net / USB / RS232 communication interface- Support anti-reverse alarm function

RIGOL - KELVINTESTCLIP-DMM - Lab Cable Set with 2 Kelvin Test Cables (Kelvin to 2 Banana)  Lab Cable Set with 2 Kelvin Test Cables (Kelvin to 2 Banana)

RIGOL - LAN-DL3 - Ethernet Communication Option for DL3000 Series Loads. Ethernet Communication Option for DL3000 Series Loads.

GW INSTEK - LCR-1100 - Handheld LCR Meter 100kHz GW Instek launches the new LCR-1000 series, which is a handheld LCR meter with the automatic real-time test function. The series adopts TFT-LCD and provides a basic accuracy of 0.2%. Users can choose to use buttons or touch screen operations. The series, with high measurement accuracy and usability, is suitable for precision tests, including maintenance test, component production, schools/research institutes, and even quality test.The LCR-1000 series comprises 2 models. The LCR-1100 provides a test frequency up to 100 kHz, and the LCR-1010 provides a test frequency up to 10 kHz. The series provides selectable test voltages (0.3/0.7/1.0Vrms) and equivalent circuits (series/parallel) to automatically measure capacitance, inductance, resistance, reactance, impedance, quality factor, loss factor, phase and DC resistance.The LCR-1000 series, with 50,000 display counts for both main and auxiliary parameters and a basic accuracy of 0.2%, supports 2-wire or 5-wire measurement. Furthermore, the series also provides the comparison function and data retention function to meet various test and measurement requirements for different types of components. The entire series is equipped with USB-HID and USB-VCOM interfaces. A simple and practical free PC software is provided and remote control commands (compatible with SCPI) are available for users to write their own personal software to meet the needs of data acquisition.Features:- 2.8” TFT Touch LCD- 50,000 Counts Resolution on Primary and Secondary Display- 0.2% Basic Accuracy- Six or Eight Selectable Test Frequencies Depends on Model- 15 Kinds Measurement Combinations Available- Test Level Selectable : AC 0.3V/0.7V/1Vrms and DC +/- 1V- Selectable measurement Speed : Fast 10 Times/s, Slow 2.5 Times/s- Auto LCR Mode for Automatic Component Type Identification and measurement- Data Hold- USB (Virtual COM) Interface for Remote Communication- Software for Datalogging is Available

GW Instek - LCR-6200 - LCR-6200 is a LCR Meter up to 200kHzThe LCR-6000 series, a compact LCR meter with diversified and abundant features, is an excellent tool for various application stages of passive components, including R&D, engineering testing, incoming inspection, etc., or the production and sorting of passive components.High-precision LCR-6000 meter provides test frequency from 2kHz/20kHz/100kHz/200kHz/300kHz (the highest), the basic accuracy is up to 0.05%, and there are 5 models in total.​ Features- 3.5” color LCD- 5 models (10Hz~2kHz/20kHz/100kHz/200kHz/300kHz)- Consecutive test frequency- Basic accuracy : 0.05%- Measuring speed up to 25ms (max.)- Full frequency range or spot OPEN/SHORT- 16 major/secondary parameter measurement combinations and two additional monitoring parameters(maximum four different parameters can be shown simultaneously)- DCR measurement and internal D.C. bias voltage (±2.5V)- PASS/FAIL judgment- Auto Level Control (ALC) function- BIN function provides 9BIN and 1AUX, totally 10 BIN- 10 steps listed tests to select different frequency, voltage and current criteria- Standard interface : RS-232C, Handler and USB Host / Device- Compact size, ideal for automatic equipment (2U,1/2 RACK)